Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
White River tambour panel gives you a solid wood solution for curved or straight runs where a flexible surface is needed, so you can add detail without building complex segmented assemblies. This Style 103 panel is identified as 3/16 inch Double Bead - Thick, which creates a tight bead pattern that reads as refined texture in appliance garages, casework, or architectural accents. The panel size of 12 inches wide by 48 inches long suits many upper cabinet and small wall applications in one piece, which helps keep joints to a minimum on visible faces. Construction uses solid wood with a flexible backing that bends, so the panel follows curves and corners instead of forcing you to seam multiple rigid components. The tambour is unfinished, letting you bring it to the same paint grade finish system used on surrounding cabinetry for a consistent final appearance.
This tambour panel is designed to attach to a solid substrate using standard construction or paneling adhesive, so you can bond it to MDF, plywood, or other stable backers set up in your shop. Using adhesive as the primary attachment method allows the flexible backing to stay in full contact with the substrate as it bends, which helps the bead face track smoothly around curves or along corners. The flexible backing construction lets you position the panel dry on a radius or flat surface, then apply adhesive for the final set, which supports fitting around appliance garage openings, curved ends, or other shaped cabinet components. Attaching to a solid substrate also gives you a consistent base for sanding and finishing, which helps the paint grade surface read evenly with nearby painted panels.
This tambour panel sits within the Appliance Garages & Tambour Doors product class, which places it naturally in upper cabinet applications where a flexible, beaded surface is desired. The 12 inch width pairs well with many cabinet module sizes, so you can integrate it into common casework dimensions without extensive ripping. At 48 inches long, the panel length supports vertical appliance garage faces, smaller door runs, or horizontal details across a section of cabinetry. Its solid wood construction with a flexible backing allows it to follow curved ends or wrap inside corners, which is useful when a design calls for continuous beads rather than faceted segments. Use of premium North American hardwoods in an unfinished state lets the panel receive your paint system on the job, so appliance garages, doors, and decorative wraps share the same paint grade appearance as frames and end panels.
The Style 103 designation with 3/16 inch Double Bead - Thick defines the bead spacing and thickness you are working with, so you can coordinate this panel with other White River tambour profiles on the same elevation. The close 3/16 inch beads create a fine texture that hides minor transitions on curved substrates, which can help keep light from revealing subtle substrate irregularities after painting. Because the panel relies on a flexible backing instead of individual loose slats, alignment of the beads stays consistent as you form curves or transition from vertical to horizontal surfaces. Using standard construction or paneling adhesive to attach to a solid substrate means the bond line supports the full panel area, which contributes to a uniform surface for sanding and priming. Allowing the unfinished tambour material to stretch and acclimate for at least 48 hours before finishing prepares the wood and backing assembly for a stable paint grade result once coatings are applied.
The White River tambour panel TM103-1248PO measures 12 inches wide by 48 inches long, which suits many cabinet openings and shorter wall runs without needing multiple pieces in one direction.
The tambour panel installs onto a solid substrate using standard construction or paneling adhesive, so the flexible backing can bond across the full surface on flat or curved bases.
Style 103 with 3/16 inch Double Bead - Thick describes a closely spaced bead profile, which delivers a fine linear texture suitable for appliance garages, doors, and decorative surfaces.
The tambour panel is unfinished and paint grade, allowing it to receive your primer and paint system so it matches surrounding painted cabinetry and trim.
This tambour panel is made from premium North American hardwoods with a flexible backing, providing a solid wood work surface that bends to follow curves and corners.
The White River tambour panel is made in the USA, supporting projects that rely on domestic solid wood tambour for repeatable sourcing and consistent supply.
The White River tambour panel Style 103, 3/16 inch Double Bead - Thick, in a 12 inch by 48 inch format, offers a solid wood, paint grade solution for curved or straight cabinet and millwork surfaces. Its flexible backing, adhesive installation method, and unfinished premium North American hardwood construction create a beaded face that bends with your substrate while accepting the same paint system as surrounding components. For appliance garages, radius cabinets, or decorative vertical runs where a continuous bead pattern is needed, this TM103-1248PO panel gives you a defined profile ready to integrate into your workflow.