Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
White River tambour panel style 102 is a solid wood tambour panel designed for appliance garages, curved corners, and other decorative wood panel needs. The panel measures 12 inches wide by 96 inches long, giving installers a full 8-foot run to cover taller cabinets or extended vertical applications in one continuous piece. Its 9/32 inch double bead thick profile creates a distinct linear texture that reads consistently across the entire surface, which helps tie together multiple panels visually when projects require repeating sections.
The tambour panel is made from premium North American hardwoods in a white oak species, so the natural grain and color work well in higher-end woodworking projects where real wood is required. Each panel is unfinished, allowing the wood to stretch and acclimate for at least 48 hours before finishing, which supports more stable color and sheen results once stains or clear coats are applied. A flexible backing allows the panel to bend, so it conforms to curves and corners where rigid stock would fight the radius and complicate installation.
This solid wood tambour panel is installed using standard construction or paneling adhesive applied to a solid substrate, which means the wood face lays over a stable backing rather than spanning open framing. Because the panel uses a flexible backing, it can follow curved or angled substrates while still maintaining bead alignment along the length. The 12 inch width works well for laying panels side by side over larger surfaces, and the 96 inch length lets installers run vertical or horizontal applications without cutting multiple short sections. Allowing the unfinished white oak to stretch and acclimate for at least 48 hours before finishing gives the material time to settle on the substrate, which supports more consistent finish appearance after installation.
This tambour panel sits in the appliance garages and tambour doors class, so it is suited to applications where a flexible, solid wood surface needs to track along a curve or roll within a cabinet opening. The 12 inch by 96 inch format fits common cabinet and millwork dimensions, letting installers use full-length pieces in appliance garages, wall cabinet niches, or decorative vertical runs. Natural color and grain variation in the white oak hardwood adds visual interest when the panel is used as a focal surface, especially in kitchens, built-ins, or custom furniture pieces that feature linear wood textures.
The solid wood construction, combined with the 9/32 inch double bead thick profile, produces a pronounced beaded face that reads cleanly in both painted and stained finishes when the panel is properly finished on site. Because the product is unfinished tambour, it can be integrated into projects that call for custom stain matching or specific clear-coat systems, giving shops and installers control over the final appearance within their existing finishing workflow.
The flexible backing built into this panel allows the solid white oak face to bend without breaking the linear bead detail, which supports smooth tracking along curves or tight inside corners. By bonding the panel to any solid substrate with construction or paneling adhesive, the installer creates a continuous, supported surface that helps the beaded profile sit flat and read consistently across doors, panels, or appliance garages.
The requirement to allow the unfinished tambour to stretch and acclimate for at least 48 hours before finishing gives the material time to relax after installation, helping the beaded pattern settle into its final position before stain or clear coats lock in the appearance. The 12 inch width simplifies layout calculations when panels are ganged across a wider opening, while the full 96 inch length minimizes joints that might interrupt the linear grain or bead pattern in tall cabinetry or full-height features.
The White River tambour panel style 102 measures 12 inches wide by 96 inches long, so it spans an 8-foot run and can cover tall cabinets or extended appliance garage openings in a single piece.
The panel is made in the USA from premium North American hardwoods in white oak, giving a real-wood face with natural grain variation for visible decorative and cabinet applications.
The tambour panel installs using standard construction or paneling adhesive onto any solid substrate, allowing the flexible backing to conform to curves while the adhesive provides full support.
The tambour is unfinished and should be allowed to stretch and acclimate for at least 48 hours before finishing, so stains or clear coats can be applied after the material has settled.
The 9/32 inch double bead thick design creates a tightly spaced, repeated bead pattern, giving the panel a distinct linear texture that visually unifies appliance garages and decorative runs.
This tambour panel is classified under appliance garages and tambour doors, so it is well suited to curved cabinet openings, roll-style doors, and decorative curved wood surfaces.
The White River tambour panel style 102 in white oak combines a 12 inch by 96 inch format, a 9/32 inch double bead thick profile, and a flexible backing to cover curved or straight cabinet surfaces with real hardwood. Using construction or paneling adhesive on a solid substrate, the panel installs as a continuous surface ready for field finishing after a 48 hour acclimation period. For appliance garages, tambour doors, or decorative wood panels that need both flexibility and a defined linear bead, this unfinished white oak panel offers a project-ready option grounded in premium North American hardwood construction.