Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
White River tambour panel style 106 is a solid wood tambour panel with a 1-1/2 inch single bead profile that creates a continuous, rounded face, useful when you need a consistent decorative rhythm across an appliance garage or specialty panel run. The 12 inch width and 96 inch length give you a full 8 foot panel to span taller openings or cut down for smaller cabinet applications while maintaining grain continuity. The panel is paint grade, so it is designed to accept paint as the final finish instead of being used as clear-stained hardwood, which helps when matching painted cabinet runs. The flexible backing allows the solid wood face to bend, so the panel follows curves and corners instead of forcing straight-line layouts. This flexibility lets you wrap curved bases, radius uppers, or appliance garage openings with a single, continuous tambour surface.
This tambour panel installs using standard construction or paneling adhesive, so it bonds directly to a solid substrate without specialized fasteners or tracks. By attaching to a solid substrate, the flexible backing and hardwood face move as a unit, which supports a smooth action around curves and corners in service. The tambour is unfinished, and the material is intended to stretch and acclimate for at least 48 hours before finishing, so the panel can relax from shipping tension before paint locks the surface. This sequence supports more stable joints and bead lines after finishing. Using a familiar adhesive installation method lets you integrate the panel into typical cabinet carcasses, appliance garage structures, or decorative wall panels using the same solid backer materials already in your shop.
This tambour panel is classified under Appliance Garages & Tambour Doors, so it is suited for projects where a flexible, slatted wood surface needs to follow a guided path, such as upper cabinet appliance garages or concealed counter niches. The flexible backing makes the panel appropriate for curved and corner applications, so it can follow inside or outside radii instead of interrupting the line with faceted joints. The 12 inch width lets you span typical cabinet depths or form door panels that track within a guide space, while the 96 inch length offers enough material for multiple door sections or taller vertical runs. Because the panel is paint grade, it supports painted appliance garages or matching painted millwork where the tambour surface needs to blend with the surrounding cabinetry color.
The 1-1/2 inch single bead design delivers a consistent face profile along the full 96 inch length, which simplifies layout when aligning beads between adjacent doors or panels in a bank of cabinets. Premium North American hardwood construction provides a solid wood face that responds predictably to machining and sanding, which helps maintain clean bead edges and smooth transitions between slats before finishing. The flexible backing is engineered to bend while keeping the hardwood segments evenly spaced, so the face pattern remains aligned as it follows guides or wraps a radius, reducing visible stepping. Using standard construction or paneling adhesive to attach the tambour to a solid substrate creates a unified assembly that supports smooth movement along curved paths where the backer defines the track. Allowing the unfinished panel to stretch and acclimate for at least 48 hours before finishing lets the wood and backing reach a stable state, supporting more even paint film build and bead definition over time.
The tambour panel measures 12 inches wide by 96 inches long, so it covers an 8 foot span or can be cut into multiple smaller sections while maintaining the bead pattern.
The tambour panel is made from solid wood using premium North American hardwoods, providing a hardwood face suitable for machining, sanding, and subsequent finishing in cabinet projects.
The tambour panel is paint grade and unfinished, so it is intended to be painted after installation and acclimation, which helps it blend with painted cabinetry and millwork.
The tambour panel is installed using standard construction or paneling adhesive onto a solid substrate, creating a bonded assembly that follows the backer shape around curves and corners.
The tambour has a flexible backing that easily bends, so the solid wood face tracks along curves and into corners, supporting curved cabinet openings and radius designs.
The tambour is unfinished and is intended to stretch and acclimate for at least 48 hours before finishing, allowing the wood and backing to stabilize before paint locks the surface.
The White River tambour panel style 106 pairs a 1-1/2 inch single bead profile with a 12 inch by 96 inch format, so one panel can supply multiple appliance garage or tambour door sections with aligned beads. Premium North American hardwood construction and a flexible backing let the solid wood face bend smoothly around curves and into corners, giving you design freedom on radius fronts. The paint grade, unfinished surface is intended for finishing after installation and acclimation, aligning the final color with surrounding cabinets. When a project calls for a solid wood tambour that bonds with standard construction or paneling adhesive to a solid substrate, this panel offers a straightforward, job-site-friendly option.