White River Tambour Panel Style 104 is a solid wood tambour panel with a 1 inch single bead profile sized at 12 inches wide by 96 inches long in walnut, so it suits tall vertical runs or wider horizontal applications in one continuous piece. The flexible backing on this tambour panel bends to follow curves and corners, allowing you to wrap appliance garages, radius cabinets, or other rounded millwork without segmenting short pieces. Being made in the USA from premium North American hardwoods, the panel provides a hardwood face ready for custom finishing to match surrounding cabinetry. The tambour is supplied unfinished, so the bare walnut surface can be stained, sealed, or top-coated to integrate with shop finishing schedules. The product class as Appliance Garages & Tambour Doors positions it for use in cabinet projects where a track-following, articulated face is needed.
The tambour panel installs using standard construction or paneling adhesive onto any solid substrate, so cabinetmakers can bond it directly to plywood, MDF, or other stable cores without specialty fasteners. Because the product is a flexible-backed solid wood panel, it is suited to being pressed into contact along curves where an adhesive bond provides even support. The unfinished walnut face allows surface preparation, sanding, and finishing after the panel has been fixed in place, which helps align color and sheen with surrounding components. Allowing the tambour material to stretch and acclimate for at least 48 hours before finishing supports dimensional stability once the adhesive has cured. Using it as an Appliance Garages & Tambour Doors component integrates a movable or wrapped surface into casework using known shop materials and methods.
This tambour panel belongs to the Appliance Garages & Tambour Doors product class, so it is suited to projects where a flexible wood face must travel around a path or cover an opening. The 12 inch width and 96 inch length make it practical for appliance garages, tall cabinet ends, or long soffit wraps where a continuous hardwood surface is preferred. The flexible backing allows the solid walnut face to follow curves and corners, so it can line curved niches, radiused gables, or corner cabinets without breaking the pattern. Because it is made from premium North American hardwoods in the USA, the panel provides a hardwood species base that aligns with common walnut cabinetry and millwork selections. Natural variations in color and grain across the panel add depth and texture, which supports use in visible areas such as upper cabinets or exposed ends.
The 1 inch single bead design sets a regular profile across the panel, creating predictable spacing that keeps visual lines consistent across appliance garage fronts or wrapped components. With a flexible backing carrying those beads, the panel can bend smoothly, which helps maintain even reveal widths when installed on a curved substrate. Attaching the tambour with standard construction or paneling adhesive to a solid substrate provides a continuous bond line, supporting uniform support under the beaded surface during movement or use. The unfinished walnut construction lets the panel stretch and acclimate for at least 48 hours before finishing, which supports minimizing movement after coatings are applied. Once bonded and acclimated, the unfinished hardwood face can be brought into the same stain and topcoat system as other walnut parts, aligning color, sheen, and touch for a coordinated installation.
The tambour panel measures 12 inches wide by 96 inches long, so it spans tall cabinet sections or wider runs in one piece for fewer seams.
The 1 inch single bead profile creates evenly spaced rounded beads across the face, giving a consistent linear pattern suitable for visible cabinet surfaces.
The tambour panel is installed using standard construction or paneling adhesive onto a solid substrate, providing a continuous bond along flat or curved surfaces.
The tambour is unfinished walnut so it can stretch and acclimate for at least 48 hours before finishing, then be stained or coated to match adjacent walnut work.
The flexible backing lets the solid wood face bend around curves and into corners, enabling wrapped cabinet ends or appliance garages without segmented pieces.
The panel is made in the USA from premium North American hardwoods, providing a solid hardwood tambour suitable for matching typical walnut cabinetry programs.
This White River tambour panel combines a 12 inch by 96 inch walnut format, a 1 inch single bead face, and a flexible backing, so it fits builds needing curved or straight hardwood surfaces. Using standard construction or paneling adhesive on a solid substrate ties it directly into common cabinet shop workflows. The unfinished, premium North American hardwood construction allows acclimation and finishing alongside other walnut components. For appliance garages, tambour doors, or curved casework that call for a continuous walnut face, this Style 104 panel offers a defined profile and format ready for layout and installation.