Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
White River tambour panel describes a flexible, solid-wood panel with a backed construction that bends, so it follows curves and corners where rigid sheet goods will not, which matters when you need smooth, continuous surfaces on non-straight runs. This White River tambour panel is Style 101 with a 3/4 inch single bead profile, so the face shows consistent rounded beads, giving cabinets and wall details a clean, repeatable linear pattern that reads evenly across a full installation. The panel measures 12 inches wide by 48 inches long, so it spans typical cabinet side heights or short wall segments in one piece, cutting down on joints that would otherwise interrupt the pattern. The tambour is made from white oak, so the exposed face presents natural white oak grain and color, which supports projects that call for a traditional hardwood appearance. The panel is part of the Appliance Garages and Tambour Doors class, so it suits rolling or sliding style door and panel applications where flexible wood construction is needed.
The panel is installed using standard construction or paneling adhesive on a solid substrate, so it relies on a full-contact bond rather than mechanical fastening, which helps keep the beaded face clean and uninterrupted. Because the tambour has a flexible backing, it presses into adhesive over flat or curved cores, allowing the installer to work from one reference edge and roll the panel into position without stressing the wood face. The unfinished white oak construction allows the material to stretch and acclimate for at least 48 hours before finishing, so the panel can settle into its final shape on the substrate before stain or topcoat locks it in place. This workflow supports cleaner joints between adjacent white oak elements and a more even finish across the beaded profile.
This White River tambour panel belongs to the Appliance Garages and Tambour Doors class, so it is suited to applications where a flexible wood surface needs to follow a track or contour, such as rolling fronts or curved cabinet sections. The 12 inch by 48 inch size lets it cover a typical appliance garage opening or small curved return with one panel, which helps keep the single bead profile continuous from edge to edge. The flexible backing structure means the solid white oak face can wrap tight inside or outside curves, so radius corners, posts, or arched soffits can match flat panel runs without switching materials. Because the face is natural white oak with inherent variation in color and grain, each installation gains added depth and texture, which is useful when a project calls for a visible hardwood surface rather than a printed pattern.
The Style 101 designation and 3/4 inch single bead profile define a specific geometry, so replacement or extension work can match an existing run by referencing the same TM101-1248WO part number, helping maintain a uniform bead size across old and new sections. Using standard construction or paneling adhesive on a solid substrate simplifies field setup, because the same bonding approach applies whether the core is straight, curved, or forms an inside corner. The flexible backing lets the panel adjust slightly as it is pressed into the adhesive bed, so minor variations in substrate shape are absorbed without telegraphing through the beaded white oak face. Leaving the unfinished tambour to stretch and acclimate for at least 48 hours before finishing allows the panel to reach a stable condition, which supports more predictable stain absorption and sheen across the beaded surface on multi-panel installations.
The White River tambour panel measures 12 inches wide by 48 inches long, so it spans many cabinet or wall sections in one piece, reducing seams and simplifying layout.
The panel uses white oak in a Style 101, 3/4 inch single bead profile, so it delivers natural white oak grain with evenly spaced rounded beads across the face.
The tambour panel is attached with standard construction or paneling adhesive to a solid substrate, allowing a clean beaded face without exposed fasteners on the surface.
The panel has a flexible backing that bends, so the solid white oak face can wrap around curves and corners while maintaining the beaded pattern during installation.
The tambour is unfinished white oak with natural color and grain variations, so it can be finished on site to coordinate with surrounding white oak cabinetry or trim.
The unfinished tambour should stretch and acclimate for at least 48 hours, allowing it to settle on the substrate so later finishing follows its final shape.
The White River tambour panel in Style 101, 3/4 inch single bead, 12 inch by 48 inch white oak gives you a flexible, adhesive-mounted solution for curved or straight cabinet and wall work. Its unfinished, premium North American hardwood construction lets you bring the same white oak grain and bead profile across appliance garages, radius corners, or short wall runs. For projects that call for a natural hardwood tambour in a defined size and profile, TM101-1248WO provides a consistent part number to pull into layout, estimating, and on-site installation plans.