Rev-A-Shelf Girasolo 1-Tier Blind Corner Kit for 12" Opening and Soft-close Slides Maple, Right hand - 4WLS871-12-R

Choose this blind corner organizer confidently

Blind corner organizer hardware helps bring hard-to-reach cabinet space forward for easier access. The Rev-A-Shelf blind corner kit in this listing is the Girasolo 1-Tier Blind Corner Kit, made for a 12 inch opening with right-handed mounting. This Girasolo tray is built with a 5/8 inch thick natural maple shelf bottom and a 1-5/8 inch solid wood finger joint rim. It pulls directly forward, which can reduce clearance issues near adjacent appliances. The unit glides on a soft-close pivot hardware system, making it a practical soft-close blind corner organizer for kitchens where smoother movement matters. As a blind corner cabinet accessory, it is designed for 18 inch base blind cabinet openings and mounts to the cabinet floor and side or top, depending on the cabinet application.

See how this Girasolo tray helps

• Rev-A-Shelf Girasolo 1-tier blind corner kit - gives you a dedicated pull-forward tray for blind corner storage instead of leaving that space difficult to reach.
• Right-handed mounting - helps buyers match the organizer to the correct cabinet handing before installation.
• Pulls directly forward - helps reduce clearance issues when nearby appliances or cabinet fronts limit side swing access.
• Soft-close pivot hardware system - supports smoother tray movement and a more controlled closing action during daily use.
• Designed for 18 inch base blind cabinet openings - gives installers a clear starting point for cabinet application checks.
• Fits a 12 inch opening - helps confirm whether the cabinet access opening matches this blind cabinet organizer for 12 inch opening use.
• 5/8 inch thick natural maple shelf bottom - provides a wood tray surface suited to buyers who want a maple blind corner organizer.
• 1-5/8 inch solid wood finger joint rim - adds a defined tray edge to help keep stored items contained.
• Mounts to cabinet floor and side or top - gives flexibility based on the cabinet construction and application.
• Limited Lifetime Warranty - provides warranty backing from Rev-A-Shelf as stated in the verified product data.

Confirm blind corner kit fit before ordering

Key specs to confirm: This blind corner pull-out is a right-hand unit for a 12 inch opening and is designed for 18 inch base blind cabinet openings. Buyers should confirm cabinet opening size, blind corner cabinet type, door handing, and whether the cabinet allows mounting to the floor and side or top. The tray has a 5/8 inch thick natural maple bottom with a 1-5/8 inch solid wood finger joint rim. If you need exact overall dimensions, clearance requirements, load details, or any compliance information, those details should be confirmed with the manufacturer or technical documentation before purchase.

What's included: One Girasolo tray, post mechanism, and mounting hardware are included.

What to verify before ordering: Confirm this is the correct right-hand configuration, that your cabinet has a 12 inch opening, that the application matches an 18 inch base blind cabinet opening, and that your cabinet construction supports the required mounting points. Follow manufacturer installation guidance and local building requirements where applicable.

Use this right hand blind corner pull-out

Solve blind cabinet access in daily use

A right hand blind corner pull-out is often chosen when a standard shelf leaves the back corner of a base cabinet difficult to reach. In many kitchens, the blind corner sits beside a range, dishwasher, or another cabinet run, and that makes side access awkward. This Rev-A-Shelf blind corner kit is built to address that problem by pulling directly forward. That forward motion matters when adjacent appliances create tight side clearance and the buyer wants a more usable storage area without reaching deep into the cabinet.

For installers, the main value is clear application guidance. The product is designed for 18 inch base blind cabinet openings and fits a 12 inch opening. The unit uses right-handed mounting, so handing should be checked before ordering. This is one of the most important compatibility points for a blind corner organizer because the wrong hand can prevent proper operation in the cabinet layout.

For buyers focused on material and finish style, the tray uses a natural maple shelf bottom. The 5/8 inch thick shelf bottom and 1-5/8 inch solid wood finger joint rim give the tray a wood construction detail that may better match cabinet interiors than wire storage in some projects. The included post mechanism and mounting hardware also help define what arrives with the kit, which is useful when planning a new install or replacing an existing blind corner cabinet accessory.

The soft-close pivot hardware system is another practical point. A soft-close blind corner organizer can help create a more controlled closing action during repeated daily use. That can be useful in busy kitchens where cookware, pantry items, or small appliances are stored in the blind corner. If your project depends on exact tray capacity, full dimensional drawings, or specific side clearance measurements, those details are not provided in the verified data and should be confirmed before purchase.

Compare this blind corner pull-out approach

When comparing blind corner organizer options, buyers usually look at access path, mounting method, tray material, and handing. This Girasolo tray uses a direct forward pull rather than relying only on deep fixed storage. That makes it a strong fit for projects where the main goal is bringing stored items out into reach while limiting interference from nearby appliances.

Another point to compare is construction. Some blind corner pull-out products use metal baskets, while this unit uses a natural maple tray with a solid wood finger joint rim. For buyers who want a wood interior component, that material detail is easy to understand and verify. The mounting method is also useful to review during comparison because this organizer mounts to the cabinet floor and side or top depending on the application, which can matter in different cabinet builds.

Brand consistency also matters when ordering cabinet hardware. Rev-A-Shelf is the verified brand for this blind corner kit, and the listing clearly states the included components, right-hand mounting, soft-close pivot hardware system, and cabinet application guidance. Those facts help buyers compare products on fit and installation requirements instead of guessing from general descriptions. Before making a final selection, confirm opening size, cabinet type, handing, and any unlisted dimensions needed for your jobsite.

Ask fit questions before you order

Order the maple blind corner organizer

Maple blind corner organizer buyers should focus on fit first, then included parts and mounting requirements. This Rev-A-Shelf unit includes one Girasolo tray, a post mechanism, and mounting hardware, with right-handed mounting for a 12 inch opening and application guidance for 18 inch base blind cabinet openings. Before purchase, confirm your cabinet handing, opening size, and whether your cabinet allows floor and side or top mounting. If your project needs exact dimensions, load details, or other technical limits, verify those points with the manufacturer documentation before ordering.