Quickscrews Phillips drive power bit is a #2 x 1-15/16 inch driver bit designed for use with Phillips screws, so it transfers power from your driver into the screw head cleanly and supports consistent fastening in woodworking or shop tasks. The #2 Phillips drive size on this Quickscrews bit matches the common screw head profile used across many woodworking applications, which helps the bit seat firmly in the recess and reduces slipping during steady driving. The 1-15/16 inch overall length gives you a compact reach, so the bit stays stable in the chuck and works well where space near the fastener is limited. As a power bit from the Quickscrews brand, it is configured for use in powered drivers, supporting repetitive driving work where steady engagement with Phillips screws is needed.
The Quickscrews #2 x 1-15/16 inch Phillips drive power bit provides a defined combination of drive size and length, giving installers a consistent feel each time it is chucked into a power driver. The #2 Phillips drive profile is designed to mate with #2 Phillips screw heads, which helps the bit fit securely into the cross recess during installation. The 1-15/16 inch length sets the working reach from the driver, supporting controlled operation where a shorter bit helps keep the driver closer to the work surface. As a power bit within the drive bits and holders category, it is intended to operate in powered driving tools where repeatable Phillips screw fastening is part of the daily workflow.
The Quickscrews #2 x 1-15/16 inch Phillips drive power bit is suited for tasks that use #2 Phillips screws, because its drive profile is made to match that screw head geometry. Installers working with cabinet hardware or other woodworking fasteners that specify a #2 Phillips head can rely on this bit size to engage the screw recess. The power bit format places this Quickscrews part 11905P within typical driver setups used on woodworking benches or installation sites, keeping the bit ready for repeated fastening steps. Its place in the drive bits and holders class means it is intended as a working connection between powered drivers and Phillips screws where controlled torque transfer is required throughout the job.
The #2 designation on this Quickscrews Phillips drive power bit sets the engagement size for common Phillips screws, which helps create repeatable seating in the screw head and supports consistent drive depth from screw to screw. The 1-15/16 inch overall length provides a fixed, compact reach from the driver nose to the screw, so the installer works with the same stance and angle each time the bit is used. This repeatability in size and reach benefits installers handling many similar fasteners during a project, because the tool behavior remains familiar across tasks. The clearly defined manufacturer part number 11905P further supports repeatability, allowing the same Quickscrews power bit specification to be selected whenever the same fastening performance is desired on future jobs.
The Quickscrews #2 x 1-15/16 inch Phillips drive power bit is sized for #2 Phillips screw heads, so it works where fasteners specify a #2 Phillips drive recess.
The Quickscrews 1-15/16 inch Phillips drive power bit keeps the reach short, which supports controlled handling in powered drivers and helps maintain alignment near the work surface.
The Quickscrews Phillips drive power bit acts as the connection between power driver and #2 Phillips screw, transferring torque into the screw head for consistent fastening.
This Quickscrews Phillips drive power bit is identified by manufacturer part number 11905P, which ties directly to the #2 x 1-15/16 inch specification.
The Quickscrews #2 x 1-15/16 inch Phillips drive power bit is classified under drive bits and holders, placing it among components used with powered driving tools.
The Quickscrews Phillips drive power bit provides a #2 drive profile and 1-15/16 inch length, giving installers a defined, repeatable setup for Phillips screw fastening.
The Quickscrews #2 x 1-15/16 inch Phillips drive power bit, part number 11905P, offers a specific combination of drive size and length that supports predictable fastening behavior. By using this defined #2 Phillips power bit in powered drivers, installers align the tool interface with common Phillips screw heads used across woodworking and shop projects, helping maintain consistent engagement and drive depth from one task to the next.
Sold In: 1 Package