Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
60mm wire grommet from Custom Plastics provides a finished edge for a 2.375 inch (60mm) bore, so cable holes in desks, counters, or panels look clean and professional. The dark gray color matches the SAP description "3PC GROMMET,2.375" (60MM) BORE,DARK GRAY," so the opening blends into many modern gray work surfaces. As a grommet in the Shelf, Closet & Garage Organization and Multimedia and Workspace Components category, it manages pass-through points where wires, cords, or hoses need a dedicated route. The Custom Plastics brand and CPF-2607 part number identify this specific fit, which helps keep repeat projects consistent. Using a dedicated wire grommet instead of a raw cutout protects the bore edge and gives a more controlled path for cables through panels in shops, offices, or storage areas.
The SAP description notes a 2.375 inch (60mm) bore, so the opening needs to be sized to that diameter for the 60mm wire grommet to sit correctly and establish a defined cable path. Because this part is a grommet rather than a general trim ring, it is intended to line the bore, so once installed it separates cords from the raw panel edge. The dark gray color helps the installed grommet integrate into gray-toned desktops, closet dividers, or garage work surfaces, keeping the focus on the workspace rather than the cutout. With the CPF-2607 identifier, installers can reference the same bore size and appearance on repeat layouts, supporting consistent results across multiple panels.
The 60mm wire grommet, identified as SAP "3PC GROMMET,2.375" (60MM) BORE,DARK GRAY," fits projects that call for a 2.375 inch round opening in panels or worktops. In multimedia and workspace components, this size gives a defined route for power cords or data cables from equipment through desks or counters. In shelf, closet, and garage organization work, the same bore can be used in vertical or horizontal panels to guide charger leads or small tool cords while keeping the cut edge lined. The dark gray color coordinates with many laminate and painted finishes in workrooms or offices, so multiple grommets can be used across a run of cabinets or shelves without visually dominating the surface. Using the CPF-2607 part number ties each location back to the same bore standard for future additions.
The defined 2.375 inch (60mm) bore in the SAP description means once that hole size is used, the 60mm wire grommet sits in a known relationship to the panel, which supports predictable cable clearances. Being part of Wurth Baer Supply's grommets category, this Custom Plastics piece is intended to finish the opening, so installers can expect the bore edge to be lined instead of exposed once the part is in place. The dark gray designation is consistent between the product name and SAP text, so matching color across multiple workstations or storage bays follows a clear spec. The CPF-2607 manufacturer part number gives a fixed reference for ordering the same grommet again, helping shops maintain identical openings when expanding a bank of desks, workbenches, or closet sections over time.
The 60mm wire grommet is specified for a 2.375 inch (60mm) bore, so holes cut to that diameter are prepared to accept this CPF-2607 grommet for a defined cable pass-through.
The Custom Plastics CPF-2607 grommet is described as dark gray, which helps it blend with gray-toned desks, cabinets, or panels in workspace and storage installations.
This 60mm wire grommet is listed under Shelf, Closet & Garage Organization and Multimedia and Workspace Components, aligning it with cable pass-throughs in storage systems and workstations.
The grommet lines the 2.375 inch bore so cables pass through a defined opening, giving a more finished look and separating cords from the raw panel edge.
The CPF-2607 part number uniquely identifies this 60mm dark gray grommet, supporting consistent reorders when matching bore size and color across multiple panels.
Wurth Baer Supply offers this Custom Plastics 60mm wire grommet, placing it within their grommets selection for workspace and organization applications.
The Custom Plastics 60mm wire grommet, defined by the CPF-2607 part number and 2.375 inch (60mm) bore description, suits projects needing a dark gray lined opening in panels or worktops. Its listing with Wurth Baer Supply in Shelf, Closet & Garage Organization and Multimedia and Workspace Components ties it directly to storage and workspace layouts where cables must pass through dedicated holes. When a 2.375 inch round bore and dark gray appearance match your cutouts and surface finishes, this specific wire grommet provides an identifiable solution you can repeat across desks, cabinets, or garage systems.