Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Vionaro H185 drawer slide describes a Grass America drawer side for building a 7-1/4 inch high, white drawer within the Grass Vionaro drawer system. It forms part of a cubist design with 90 degree angles, which creates straight, square drawer sides that line up cleanly with modern cabinet lines. The slimline 13 mm, or 1/2 inch, side width keeps the drawer profile narrow, leaving more usable interior space inside the cabinet run. This Vionaro component works with a 21 inch nominal length, aligning with full-depth base cabinets using Grass undermount slides. The bottom panel is cut to size without notching, so the panel remains rectangular while still engaging the drawer sides. Tool-free front assembly lets the front connect to the system without separate tools, which supports faster assembly and on-site adjustments. As part of the Grass Vionaro drawer system, this piece integrates with coordinated fronts and runners.
This Grass Vionaro drawer system component is identified as 21 inch VIONARO H185, white, matching base-cabinet depth projects that use 21 inch undermount slides. Integrated side and height adjustment allow the installed drawer front to shift laterally and vertically, which supports consistent gaps across multiple drawers in a bank. Tilt angle adjustment at the back lets the installer tune the angle of the drawer front, helping it sit flush to the cabinet face or adjacent fronts. Plus and minus adjustments for all dimensions give small incremental moves in each direction, backing up precise alignment after cabinetry is installed. Compatibility with Dynapro 2D undermount slides connects this Vionaro H185 side to proven undermount runner technology in two-way adjustment applications. Compatibility with Dynapro 3D undermount slides using a 3D adapter set allows use where three-way runner adjustment is preferred.
This Vionaro H185 drawer slide works within the Grass Vionaro drawer system for both frame and frameless cabinetry, so it applies to a wide range of kitchen, bath, and furniture layouts that follow that system. The 7-1/4 inch drawer side height suits medium-tall drawers where storage volume and front height need more presence than shallow top drawers. White finish on the drawer side coordinates with light-colored interiors in modern cabinet programs that favor clean, bright lines. The cubist design with 90 degree angles matches straight-edged cabinet fronts, so the drawer side geometry supports the overall square aesthetic of the installation. When paired with compatible Dynapro undermount slides, this component helps deliver concealed runner performance under a straight, slim drawer box, creating a clean interior and exterior appearance in line with contemporary hardware expectations.
The integrated side and height adjustment build into the Vionaro H185 system, so installers can fine-tune drawer front position without disassembling the drawer, which supports repeatable results from cabinet to cabinet. Tilt angle adjustment at the back lets each drawer front pivot slightly, aligning tall or wide fronts so they sit even with neighboring fronts, which reduces visible twist across a bank. Plus and minus adjustments for all dimensions allow small movements in either direction, which helps correct for minor cabinet or floor irregularities without reworking the carcass. The front adapter with stabilizer ensures maximum stability on tall fronts, so higher drawer faces stay aligned when opened and closed repeatedly. Compatibility with Dynapro 2D undermount slides provides a proven undermount runner interface, and compatibility with Dynapro 3D undermount slides using a 3D adapter set adds runner-based three-way adjustment where that level of tuning is part of the specification.
The Vionaro H185 drawer slide is specified for a 7-1/4 inch high drawer side, which suits medium-tall drawers needing more storage depth and a taller front profile in the cabinet run.
The Vionaro H185 uses a slimline 13 mm, or 1/2 inch, side width, which keeps the drawer box narrow and helps maximize usable interior space inside the cabinet opening.
This Vionaro H185 drawer side is compatible with Dynapro 2D undermount slides, and also works with Dynapro 3D undermount slides when used with the specified 3D adapter set.
The 3 dimensional adjustment combines integrated side and height adjustment with tilt angle adjustment at the back, so the drawer front can be tuned for even gaps and flush alignment.
The front adapter with stabilizer supports maximum stability on tall fronts, which helps tall drawer faces move smoothly without wobble when opened and closed repeatedly.
The Vionaro H185 drawer component is specified for frame and frameless cabinetry, so it integrates into different cabinet constructions that use the Grass Vionaro drawer system.
The Grass America Vionaro H185 drawer slide, identified by part number F135121609207, brings the cubist 90 degree design and slimline 13 mm side width into a 21 inch Vionaro drawer build. Three dimensional adjustment with plus and minus movements supports precise reveals in both frame and frameless cabinetry. Compatibility with Dynapro 2D and Dynapro 3D undermount slides using the 3D adapter set ties this drawer side into established runner platforms. For projects built around the Grass Vionaro drawer system, this white 7-1/4 inch side component supports consistent visual lines and repeatable installation results.