Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kreg Dowel 1/2 x 1-3/4 describes a 1/2-inch diameter, 1-3/4-inch long dowel that creates a substantial mechanical connection, so cabinet and furniture joints gain solid bearing strength along the grain. These Kreg Dowels are part of the Kreg Tool fastener line in the dowel rods and pins class, so they integrate naturally into woodworking workflows that already rely on dowel joinery. Each dowel is fluted, which forms glue channels along the length, helping adhesive distribute more evenly around the joint so the bond can develop across the full surface. The dowels also have chamfered ends, which guide each piece into its matching hole, reducing hang-ups when driving parts together during glue-up. The product is identified as KD500-20, which helps match specifications across drawings, cut lists, and ordering so the same size dowel is used consistently on repeat builds.
The 1/2-inch diameter listed for Kreg Dowels means drill setups can standardize around common 1/2-inch bits, which simplifies jig selection and reduces changeover time when boring multiple parts. At 1-3/4 inches long, each KD500-20 dowel reaches deep into mating pieces, so installers gain more forgiveness on minor hole depth variations while still maintaining solid engagement. The fluted profile along the body manages glue squeeze-out, so parts seat more predictably under clamps instead of floating on excess adhesive. Chamfered ends transition smoothly into the hole, which helps parts draw together even when alignment is slightly off, useful during full cabinet or shelving glue-ups. Because these dowels are specified for furniture, shelving, repairs, and similar work, they slot into everyday shop tasks that rely on consistent dowel sizing.
The description notes Kreg Dowels as perfect for furniture, shelving, repairs, and more, so they match common joinery tasks such as attaching rails to legs, building cabinet carcasses, or reinforcing shelves. The 1/2-inch diameter works well where parts need robust connection points, such as thicker side panels or wide face frames that take repeated loading. With 1-3/4-inch length specified, the KD500-20 dowels support deeper engagement in substantial stock, such as table aprons or cabinet sides, helping joints resist twisting in service. As part of the dowel rods and pins product class, they integrate into layouts that use pairs or rows of dowels along edges, which helps keep parts aligned over long runs. Their role within the fasteners category connects them directly to other mechanical joining methods in the shop, allowing consistent joint strategies across a project.
The fluted design called out for these Kreg KD500-20 dowels supports repeatable results by giving glue somewhere to go as parts are pressed together, so hole pressure stays manageable and reduces spring-back. Chamfered ends help the dowels find their holes faster, which matters when assembling multi-dowel joints where several points must engage at once. The exact 1/2-inch by 1-3/4-inch dimension allows drilling operations to be set once and reused across identical parts, providing consistent hole spacing and depth with standard bits and jigs. Using dowels identified by the KD500-20 part number allows shops to match future orders to the same geometry, supporting consistent fit on repeat runs or service repairs. Because these are specified by Kreg Tool, installers aligning other Kreg joinery solutions can coordinate dowel locations with existing Kreg tooling approaches across furniture and shelving builds.
The Kreg KD500-20 dowels are 1/2-inch in diameter and 1-3/4-inch long, giving substantial embedment and glue area for furniture, shelving, and repair joints in thicker stock.
The Kreg Dowels are fluted, creating channels that move glue along the dowel, which supports even adhesive coverage and lets parts seat fully without hydraulic resistance.
The dowels have chamfered ends to guide them into pre-drilled holes, which eases alignment during assembly and helps parts draw together smoothly under clamping pressure.
Kreg identifies these dowels as perfect for furniture, shelving, repairs, and more, so they suit casework, panel joints, rail connections, and reinforcement tasks in wood projects.
The 1/2-inch diameter allows use of standard 1/2-inch drill bits and jigs, which streamlines boring operations and keeps hole sizing consistent across multiple parts.
KD500-20 is the manufacturer part number identifying these Kreg 1/2-inch x 1-3/4-inch fluted dowels, helping shops reorder the exact same size for consistent future work.
The KD500-20 designation on Kreg Dowel 1/2 x 1-3/4 ties a specific diameter, length, fluted body, and chamfered ends to one repeatable fastener choice. That consistency helps professional installers and serious woodworkers organize drilling patterns, plan glue-up workflows, and standardize joint strength expectations across furniture, shelving, and repair projects. Selecting these Kreg Tool dowel rods and pins through Wurth Baer Supply provides a clearly defined fastener for wood assemblies that depend on precise alignment and dependable glued joints.
Sold In: 1 Package