Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kreg 1/2-in Dowel Jig Upgrade Kit expands the capabilities of the Kreg Dowel Jig Kit by adding 1/2-in dowel hole drilling, which lets you handle larger-diameter dowel joinery on the same jig setup. This upgrade is designed specifically for use with the Kreg Dowel Jig Kit, so the parts match the existing system and keep the workflow familiar on cabinet, furniture, or shop projects. The kit uses hardened steel drill guides to keep the 1/2-in drill bit running straight, which helps deliver accurate, repeatable dowel joints in solid wood or similar stock. An alignment pin is part of the system to position the drill guide block without measuring, which speeds up layout when repeating hole locations along an edge or face.
The Kreg Dowel Jig Upgrade Kit is built to work with the Kreg Dowel Jig Kit, so the 1/2-in drill guide block sets into the jig body and uses the same basic clamping approach you already use. The alignment pin works with the jig to position the guide block for drilling, which keeps hole placement tied to the jig layout instead of separate marking. The 1/2-in drill bit pairs with the hardened steel drill guides, so the bit tracks straight through the block and into the workpiece. The stop collar on the bit is set to control drilling depth, which keeps mating holes matched and supports tight, even dowel joints.
The KREG DOWEL JIG KIT UPGRADE ONLY, 1/2IN is intended for users of the Kreg Dowel Jig Kit who need to add 1/2-in dowel joinery to their workflow, so it fits naturally into projects already using the base jig. Woodworkers can apply the 1/2-in dowel holes on thicker shelves, legs, rails, and structural joints where a larger dowel diameter is preferred, and the dedicated 1/2-in drill guide block keeps those holes consistent across parts. The alignment pin works alongside the Kreg Dowel Jig Kit layout, so row spacing and reference edges stay tied to the original system and help panels, frames, or carcass pieces register together correctly during glue-up.
The Kreg 1/2-in Dowel Jig Upgrade Kit uses hardened steel drill guides, which keep the 1/2-in bit centered and straight through the guide block, supporting square, accurately placed holes that line up between mating pieces. The 1/2-in drill bit with stop collar is matched to the guide block, so depth control is built around the same diameter, helping each dowel seat to a consistent depth and reducing joint variation. The alignment pin positions the drill guide block relative to previously drilled holes in the Kreg Dowel Jig Kit, which lets users index from one hole to the next without measuring and keeps spacing uniform across longer runs. The dowel sample pack is sized for the 1/2-in holes produced by the upgrade kit, so fit and depth can be proven on trial pieces before running a full set of parts, helping maintain steady results on production or batch work.
The Kreg 1/2-in Dowel Jig Upgrade Kit adds 1/2-in dowel hole capability to the Kreg Dowel Jig Kit, which allows larger-diameter dowel joints on projects already using the Kreg system.
The KREG DOWEL JIG KIT UPGRADE ONLY, 1/2IN is designed to enhance the Kreg Dowel Jig Kit, so users of that jig can expand to 1/2-in dowel joinery.
The hardened steel drill guides in the Kreg 1/2-in Dowel Jig Upgrade Kit keep the 1/2-in bit straight through the guide block, which supports accurate, square dowel holes.
The alignment pin in the Kreg 1/2-in Dowel Jig Upgrade Kit positions the drill guide block without measuring, which helps repeat hole locations along edges or faces.
The 1/2-in drill bit with stop collar in the Kreg 1/2-in Dowel Jig Upgrade Kit sets a fixed depth, which keeps dowel sockets uniform and helps joints pull together evenly.
The dowel sample pack in the Kreg 1/2-in Dowel Jig Upgrade Kit provides 1/2-in dowels sized for the drilled holes, which allows testing joint fit before working on final parts.
The Kreg 1/2-in Dowel Jig Upgrade Kit is tailored to expand the Kreg Dowel Jig Kit with 1/2-in dowel holes, giving woodworkers a direct way to add larger dowel joinery. With the 1/2-in drill guide block, alignment pin, hardened steel drill guides, 1/2-in drill bit with stop collar, and dowel sample pack all focused on the same diameter, this kit keeps the process consistent from drilling through assembly. For shops that already rely on the Kreg Dowel Jig Kit, this upgrade aligns with the existing workflow while opening up more structural dowel joint options.
Sold In: 1 Each