Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value matte black closet rod and shelf brackets support both an oval closet rod sized 1-1/8 inch by 5/8 inch and a shelf above, so a single bracket handles hanging space and shelving in one run. The bracket is part of the Closet Shelf and Rod Brackets class, which keeps your hanging rod and shelf aligned as one assembly in closet, shelf, and garage organization layouts. The design holds shelf material up to 14 inches deep, so standard closet shelf dimensions sit fully supported along the arm. A 3mm thick steel construction carries a rated load capacity of 110 lbs, which handles typical clothing and storage loads in residential closets when brackets are spaced appropriately. Overall size of 1 inch wide by 11-3/4 inches deep by 10-7/8 inches high gives a compact footprint that still reaches out to support deeper shelving.
The overall size of 1 inch wide by 11-3/4 inches deep by 10-7/8 inches high gives installers clear reference points when laying out stud locations and shelf overhang. The oval holder sized for 1-1/8 inch by 5/8 inch rods centers that tubing in the bracket, so the rod sits at a repeatable height along the wall. Shelf support up to 14 inches deep allows the shelf board to sit fully on the arm, so cuts can be planned to that dimension without overhang guessing. With a 110 lb load capacity and 3mm steel construction, the bracket is built for typical closet and storage runs where hanging loads and shelf contents stay within that rating.
This closet rod shelf bracket is identified as a Closet Shelf and Rod Bracket in shelving and accessories, so it ties directly into closet, shelf, and garage organization layouts where hanging and shelving work together. The oval rod housing is designed for a 1-1/8 inch by 5/8 inch, or 30mm by 15mm, closet rod, so it supports that specific oval tube often used in modern closet systems. Shelf capacity up to 14 inches deep matches common closet shelf depths, so wood, melamine, or similar shelf materials can sit flush on the arm without unsupported edges. The 11-3/4 inch depth of the bracket positions the shelf so hangers on the rod sit comfortably under the front edge, giving hanging space and upper storage a shared footprint. A matte black finish ties visually to other dark closet hardware, so rods and brackets maintain a consistent look along the run.
The 3mm thick steel body keeps the bracket rigid, so the 1-1/8 inch by 5/8 inch oval rod stays straight between supports instead of sagging under typical clothing loads. With an overall height of 10-7/8 inches, the bracket sets a repeatable vertical position for both rod and shelf, so multiple brackets across a wall hold the shelf level and keep the rod at the same hanging height. The 1 inch width concentrates the load path close to the mounting line, so the bracket sits neatly on framing or backing panels while still delivering the 110 lb load capacity. The 11-3/4 inch projection out from the wall works with shelf material rated up to 14 inches deep, so the rear of the shelf can sit near the wall while the front edge stays well supported by steel underneath. The stated load capacity of 110 lbs lets planners model how many brackets to use in a section, so hanging garments and stored items remain within the working rating when spaced across a closet or garage wall.
This closet rod and shelf bracket supports an oval closet rod sized 1-1/8 inch by 5/8 inch, or 30mm by 15mm, so it matches common oval rod stock used in many closet layouts.
This bracket supports shelf material up to 14 inches deep, so typical closet shelving can sit fully on the support arm without leaving the front edge hanging unsupported.
This closet rod shelf bracket has a load capacity of 110 lbs, so designers can plan bracket spacing to carry expected clothing and storage loads within that rating.
This bracket measures 1 inch wide by 11-3/4 inches deep by 10-7/8 inches high, so it provides reach for shelf support while staying compact on the mounting surface.
This bracket is made from 3mm thick steel, so the rod and shelf support stay rigid under load in typical closet and garage storage conditions.
This closet rod and shelf bracket has a matte black finish and carries manufacturer part number 72535 51 189, so it aligns with matching Pro Value components.
This Pro Value matte black closet rod and shelf bracket from US Futaba combines oval rod support at 1-1/8 inch by 5/8 inch with shelf capacity up to 14 inches deep, so one component handles both hanging and shelving. With 3mm steel construction, a 110 lb load capacity, and overall dimensions of 1 inch wide by 11-3/4 inches deep by 10-7/8 inches high, it suits closet, shelf, and garage organization projects where rod profile, shelf depth, and load rating are defined. Use the specified dimensions and ratings to match this bracket to planned rod stock and shelving depths across your layout.
Sold In: 20 Each