Chemetal HPL laminate identified as 315S Canterbury .043 HPL 4x10, C315S012, is a decorative laminate sheet used as a surfacing material. The product class is laminate, so it serves as a hard, finished face over suitable substrates, helping create uniform project surfaces. The brand Chemetal and category Edgebanding & Surfacing|Chemetal HPL identify it as part of a coordinated surfacing line, which supports visually consistent work across panels and related components. The SAP description CANTERBURY 315S 120X48X.043HPL confirms the nominal 120 by 48 inch size, giving enough coverage for common cabinet, furniture, or architectural panels. The .043 HPL thickness provides a defined laminate layer that is substantial for surfacing while remaining workable with standard laminate fabrication techniques.
The 4x10 foot size defined in the web description 315S CANTERBURY .043 HPL 4X10, C315S012 gives installers a known starting dimension, which supports accurate rough-cut layouts before trimming. The .043 HPL thickness in the SAP description CANTERBURY 315S 120X48X.043HPL indicates a laminate layer that integrates into standard laminate build-ups, helping maintain expected edge and reveal relationships in cabinets or fixtures. Being part of the Edgebanding & Surfacing|Chemetal HPL category, this sheet aligns with typical HPL fabrication workflows, supporting straightforward routing and flush-trimming processes in a familiar sequence on shop equipment.
The category Edgebanding & Surfacing|Chemetal HPL identifies the 315S Canterbury .043 HPL 4x10, C315S012 as a surfacing solution for woodworking and related trades that use laminate-faced components. As a laminate in 120 by 48 inch format, it suits flat panel applications such as cabinet sides, doors, counter faces, or fixture panels where a decorative, hard surface is needed. The product class Laminate means it is used over structural substrates rather than as a structural core, so it plays the role of the finished visual and wear layer on casework or built-ins. The Chemetal branding places it within a recognized laminate and surfacing line that supports coordinated looks on projects that already use Chemetal HPL materials.
The SAP description CANTERBURY 315S 120X48X.043HPL specifies both the 120 by 48 inch size and the .043 HPL thickness, which helps fabricators standardize cut lists, yields, and trim allowances from job to job. The consistent 4x10 sheet format referenced in the web description 315S CANTERBURY .043 HPL 4X10, C315S012 allows shops to build templates and jigs around predictable panel sizes, improving throughput when running multiple identical parts. As a laminate classified in the Edgebanding & Surfacing|Chemetal HPL category, it integrates with established HPL fabrication steps, helping reduce setup changes between different laminate SKUs. The stable manufacturer part number C315S012 provides clear traceability, supporting straightforward matching when a project requires additional sheets or later expansion.
The product CANTERBURY 315S 120X48X.043HPL is specified as 120 by 48 inches, so projects can be laid out on a 4x10 foot laminate sheet for panel work.
The 315S Canterbury C315S012 is classified as Laminate in the Chemetal HPL surfacing category, so it functions as a decorative laminate layer over suitable substrates.
The SAP description CANTERBURY 315S 120X48X.043HPL indicates a .043 HPL thickness, giving a defined laminate layer for typical high-pressure laminate fabrication.
The part number C315S012 is the manufacturer part number for this Chemetal HPL laminate, helping shops specify, track, and reorder the exact 315S Canterbury sheet.
The 4x10 format described as 4X10 and 120X48 supports efficient nesting of cabinet sides, doors, or panels on a single Chemetal laminate sheet.
This 315S Canterbury laminate belongs to the Edgebanding & Surfacing|Chemetal HPL category, placing it within Chemetal HPL surfacing materials.
The product identified as 315S CANTERBURY .043 HPL 4X10, C315S012 delivers a Chemetal laminate sheet in a 4x10, 120 by 48 inch format with .043 HPL thickness, as stated in the SAP description CANTERBURY 315S 120X48X.043HPL. For woodworking and related trades relying on laminate-faced components, these defined dimensions and laminate classification support predictable layout, cutting, and fabrication on every run. When a project calls for a Chemetal HPL surfacing solution matching this specification, this 315S Canterbury sheet is the targeted choice for controlled, repeatable results.
Sold In: 1 Sheet