Chemetal 505 Butterfly Effect Aluminum Metal Laminate 48" x 120", C505G004

Butterfly Effect Aluminum Laminate For Surfacing

Butterfly Effect Aluminum laminate from Chemetal is a laminate sheet designed for decorative surfacing where an aluminum look is required. The product name Butterfly Effect Aluminum - 505 Laminate, 4x10, C505G004 identifies it as a metal-based surfacing laminate in a 4 by 10 foot format, which suits large panel, cabinet, or fixture faces that benefit from full-size coverage with a single sheet. The SAP description stating BUTTERFLY EFFECT ALUM 120X48X.020 M/O confirms a nominal 120 by 48 inch size at 0.020 inch thickness, giving a thin profile that integrates into standard laminate build-ups while keeping edge transitions manageable during fabrication. The Chemetal brand and Chemetal HPL category classify this product as a laminate solution commonly used in woodworking-related interiors, so it fits well wherever a decorative metal laminate finish is part of the design.

Key Chemetal Laminate Details For Projects

• The product is classified as Laminate, so it serves as a surfacing layer over a suitable substrate, which lets fabricators create aluminum-look panels without working full-thickness metal sheet.
• The 4x10 size noted in the name and 120x48 dimension in the description indicate a large-format sheet, which supports layouts with fewer seams on tall cabinets, wall panels, or counter faces.
• The 0.020 inch thickness referenced in the SAP description signals a relatively thin laminate, which helps with routing edges, building tight reveals, and blending this sheet into other laminate systems.
• The Chemetal HPL category ties this laminate to common high-pressure laminate workflows, so shops familiar with laminate fabrication can integrate this material using their existing equipment routines.
• The manufacturer part number C505G004 provides a precise identifier, which matters when matching existing installations, reordering for phased projects, or aligning job specifications to a specific finish.

Dimensional Format And Laminate Fit Considerations

The SAP description listing 120X48X.020 defines a sheet that measures approximately 120 inches by 48 inches at 0.020 inch thickness, which gives installers a predictable panel size when breaking down sheets for cabinetry or architectural millwork. The 4x10 reference in the product name aligns with this dimension, so layout drawings can rely on a single, consistent format for yield calculations and cutting patterns. Because this Butterfly Effect Aluminum laminate is categorized under Chemetal HPL, it fits within laminate-centric workflows, allowing fabricators to plan their stack-ups and edge treatments around a known thickness and sheet size for more controlled fabrication and installation.

Using Butterfly Effect Aluminum Laminate In Workflows

Where This Chemetal Laminate Is Typically Applied

The category Edgebanding & Surfacing and the Chemetal HPL classification show that Butterfly Effect Aluminum laminate is used as a surfacing material in woodworking-centered environments. This positions the C505G004 sheet for applications such as cabinet exteriors, wall panel faces, and similar casework where an aluminum appearance is part of the design intent. The product class Laminate means it is intended to sit over substrates commonly used in shop work, supporting consistent panel construction practices across a project. Because the sheet size is identified as 4x10 and 120 by 48 inches, it works well on taller panels and wide surfaces where full-sheet coverage is desirable, reducing the number of panel joints that need alignment during assembly.

Why The C505G004 Format Supports Repeatable Results

The manufacturer part number C505G004 uniquely identifies this Butterfly Effect Aluminum - 505 Laminate variant, which helps maintain finish continuity across phases of a project when the same look is required in multiple areas. The stated 0.020 inch thickness and Chemetal HPL classification indicate a laminate profile that integrates into laminate-based shop standards, aiding in predictable routing depths, edge treatments, and flush transitions to adjacent laminate types. With the dimensions spelled out as 120X48, fabricators can standardize cut lists around full sheets, improving material planning and supporting efficient nesting on CNC or panel saws. Together, the defined part number, sheet size, and thickness give installers and shop teams consistent parameters for repeatable fabrication, reduced layout guesswork, and alignment with documented job specifications.

Common Questions About Butterfly Effect Aluminum Laminate

Select Butterfly Effect Aluminum Laminate For Defined Surfacing

The Butterfly Effect Aluminum - 505 Laminate, 4x10, C505G004 from Chemetal offers a defined 120 by 48 inch format at 0.020 inch thickness, giving projects a clearly specified laminate sheet for aluminum-look surfacing. With its Laminate product class and Chemetal HPL category, it fits into established laminate workflows used by woodworking professionals. For projects that call for a repeatable aluminum surfacing solution with a known size, thickness, and part number, this Butterfly Effect Aluminum laminate provides a clearly documented option for design-driven millwork and cabinetry.