Satin Brass 804 Laminate is a Chemetal laminate sheet designed for surfacing projects where a satin solid brass look is required. The product is identified as Chemetal laminate in the Chemetal HPL category, so it fits into metal-inspired surfacing work where a consistent appearance is important across multiple components on the same job. The SAP description lists SATIN SOLID BRASS 804P 120X24X.055 W/B, which defines the satin solid brass 804P pattern and a 120 by 24 inch size at 0.055 inch thickness, giving fabricators a clear working format for layout, cutting, and yield planning when setting up panels or strips. The product name states 2x10, which also describes a 2 foot by 10 foot sheet, helping shops plan handling, storage, and break-down steps for casework or decorative panels.
The product name Satin Brass - 804 Laminate, 2x10, C804P006 defines this item as a laminate sheet rather than solid stock, so shops can plan standard laminate handling methods when moving and staging it around the bench. The size signals that the sheet spans roughly 2 feet by 10 feet, giving installers a clear idea of how it will sit on full-height panels or banked cabinet faces and how many parts can be nested from each sheet during cutting. The 0.055 inch thickness in SATIN SOLID BRASS 804P 120X24X.055 W/B means the sheet adds a defined build to substrates, which matters when aligning reveals against neighboring materials or fitting within existing clearances on cabinetry and fixtures.
The Category line Edgebanding & Surfacing|Chemetal HPL identifies this product as part of a surfacing system, so it suits applications where a laminate face is bonded to a substrate for visible surfaces on woodworking or casework projects. The satin solid brass 804P description indicates a satin brass aesthetic, which supports decorative work such as panels, faces, or details that call for brass appearance while still working within laminate-based construction. The 2x10 reference in the product name and the 120X24 dimensions in the SAP description show that the sheet spans a substantial length and moderate width, which fits layouts involving tall components and multiple smaller parts nested from one sheet. Because the sheet is defined as laminate in the Product Class, it aligns naturally with shop processes that already use laminates for vertical or horizontal surfaces where controlled appearance and repeatable fabrication are priorities.
The Manufacturer Part # C804P006 provides a precise Chemetal identifier, allowing shops to call out the exact satin brass 804 pattern on drawings and job tickets so the same look is maintained from sample approval through final installation. The SATIN SOLID BRASS 804P 120X24X.055 W/B wording specifies both pattern and size in one description, which simplifies estimating and material ordering because each sheet corresponds to a known coverage area and thickness. The Product Class listed as Laminate tells fabricators to integrate this material into standard laminate press, trim, and finishing workflows, so tooling setups and edge details can be planned around laminate behavior. The combination of Chemetal branding and the Chemetal HPL category also means the sheet sits within a broader Chemetal laminate line, which helps specifiers coordinate multiple finishes on the same project while staying within a single material family for documentation and job control.
Satin Brass - 804 Laminate, 2x10, C804P006 is classified as Laminate in the product class, so it is used as a surfacing layer rather than as solid brass stock.
The SATIN SOLID BRASS 804P 120X24X.055 W/B size defines a 120 by 24 inch sheet at 0.055 inch thickness, giving clear coverage and build for layout, cutting, and edge detail planning.
The SATIN SOLID BRASS 804P wording identifies a satin solid brass 804P pattern, guiding designers who need a specific satin brass look for coordinated surfaces.
This product sits in the Edgebanding & Surfacing|Chemetal HPL category, placing it within Chemetal laminate surfacing materials for woodworking and casework applications.
Manufacturer Part # C804P006 uniquely identifies this Chemetal Satin Brass 804 laminate, helping shops specify and reorder the exact same finish and pattern.
The 2x10 reference in the product name indicates a 2 foot by 10 foot sheet, which suits tall panels or multiple smaller components nested from a single laminate sheet.
The Satin Brass - 804 Laminate, 2x10, C804P006 from Chemetal combines a defined satin solid brass 804P pattern with a 120X24X.055 sheet size, giving fabricators a known format for planning coverage, part nesting, and edge conditions. The Laminate product class and Edgebanding & Surfacing|Chemetal HPL category position it squarely in laminate surfacing workflows, so it can be specified confidently wherever a satin brass laminate face is required. For woodworking and casework projects moving through Wurth Baer Supply, this defined Chemetal satin brass laminate helps keep finish selection, ordering, and fabrication aligned from design through installation.
Sold In: 1 Sheet