Satin Silver Aluminum - 909 Laminate, 4X8, C909P007

Satin Silver Aluminum 909 Laminate For Surfacing

Satin Silver Aluminum 909 Laminate from Chemetal is a laminate surfacing material in a satin silver aluminum look, giving woodworking and casework projects a metallic appearance that supports modern, clean-lined designs. The sheet is identified as 909P 96 x 48 x .055 W/BACK, so it measures 96 inches by 48 inches with a nominal thickness of .055 inch, providing a substantial surfacing layer that works well across standard 4x8 panel layouts. As part of the Chemetal HPL category, this product is structured as a laminate, so it is intended to be bonded to suitable substrates in cabinet, fixture, or architectural millwork work. The Satin Silver Aluminum designation describes the aesthetic, which helps projects match other satin aluminum elements visually.

Key Satin Silver 909 Laminate Work Advantages

• The 96 x 48 inch size follows a 4x8 layout, so it covers common sheet-goods dimensions in a single piece, which reduces seam planning on full cabinet sides or door banks.
• The .055 inch nominal thickness creates a laminate layer with noticeable body compared to thinner films, helping maintain a consistent face across doors, drawer fronts, and panel runs.
• The satin silver aluminum appearance ties into metal-look designs, so it supports projects where decorative surfaces need to coordinate with satin aluminum pulls, trim, or frames.
• The Chemetal HPL classification identifies it as a laminate product, fitting directly into workflows that already use laminate presses and standard laminate bonding processes.
• The Chemetal C909P007 manufacturer part number provides a precise identifier, simplifying reorders and matching across multiple jobs or phases that rely on the same satin silver appearance.

Size And Format Details For Layout Planning

This Chemetal 909 laminate is defined as 909P 96 x 48 x .055 W/BACK, so it presents a 4x8 sheet format that aligns with common panel sizing in the shop. The 96 by 48 inch dimensions help layout full-height cabinet ends or multiple fronts from a single sheet, improving material utilization. The .055 inch laminate thickness gives fabricators a specific dimension to factor into edge treatments, reveals, or transitions to adjacent surfaces when planning assemblies.

Putting Satin Silver Aluminum 909 Laminate To Work

Where This Chemetal 909 Laminate Is Applied

Chemetal Satin Silver Aluminum - 909 Laminate, 4X8, C909P007 belongs to the Edgebanding & Surfacing and Chemetal HPL category, so it fits directly into surface finishing roles on wood or composite panels used in cabinetry and woodworking. The satin silver aluminum description points to projects targeting a metallic aesthetic, such as casework, fixtures, or architectural millwork that visually coordinate with aluminum details. With its 96 x 48 inch format, the sheet size supports broad surfaces like cabinet ends, closet panels, and larger vertical runs, allowing layouts that minimize joints across visible faces. As a laminate product class, it functions as the visible wear surface over a substrate, giving fabricators a defined decorative layer in their assembly stack-up.

Why The 909P 96 x 48 x .055 Format Matters

The 909P 96 x 48 x .055 W/BACK specification defines both footprint and thickness, allowing shops to plan yields and edge details with reliable dimensions. The 4X8 reference in the product name reinforces that this Chemetal C909P007 sheet aligns with standard shop handling and storage routines built around 4x8 materials. At .055 inch thickness, the laminate contributes a measurable layer in door and panel builds, which helps with predictable reveals when coordinating with other laminate colors or materials in the same project. The satin silver aluminum appearance provides consistency from sheet to sheet when using this specific Chemetal 909 laminate across banks of cabinets or multiple rooms, supporting a uniform look when the same part number is pulled for repeat work.

Common Questions About Chemetal 909 Laminate Use

Select Satin Silver Aluminum 909 Laminate For Your Next Run

The Satin Silver Aluminum - 909 Laminate, 4X8, C909P007 from Chemetal offers a defined 96 x 48 x .055 format and a satin silver aluminum look, giving shops a consistent surfacing option for cabinet, fixture, or millwork projects that call for a metallic laminate finish.