Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Emtek Contemporary Edge Pull gives cabinets a low-profile handhold along the door or drawer edge, which creates a clean-lined way to open and close fronts without a projecting handle in tight runs or near adjacent obstacles. The 3 inch center to center sizing defines the screw hole spacing, so it aligns with layouts designed around standard 3 inch pulls on doors or drawers. Oil rubbed bronze finish provides a dark, traditional tone on the edge of the panel, which helps the pull visually coordinate with other bronze-finished hardware in the same room. Emtek branding identifies this part as part of Emtek decorative hardware lines, which matters when matching other Emtek handles and pulls on a project. The product name and category place this part in handles and pulls for cabinet work, so it fits typical woodworking, millwork, and cabinet shop jobs where a contemporary edge-mount pull is specified.
The 3 inch center to center spec on the Emtek Contemporary Edge Pull sets the exact spacing for the mounting points, which lets installers drill consistent, repeatable holes along cabinet edges without adjusting jigs between openings. The cabinet edge pull designation clarifies that this piece is intended to register along an edge, which influences how fabricators detail the front thickness and overhang so the handhold feels natural in use. The oil rubbed bronze finish identifies the surface treatment, which matters when aligning this pull with door and drawer fronts in darker wood tones or bronze-focused hardware schemes. The Emtek manufacturer part number 87100US10B gives shops and contractors a precise reference when reordering the same edge pull for later phases or matching existing installations.
The Emtek Contemporary Edge Pull, identified as a cabinet edge pull, is intended for use on cabinet doors or drawers where the pull mounts at the edge rather than on the flat center of the face. That edge-mount identity helps cabinetmakers design fronts with the correct lip or reveal, so fingers can comfortably grab the pull from the edge. The 3 inch center to center measurement suits layouts that standardize on 3 inch hardware across a kitchen, bath, or built-in, which keeps drilling patterns consistent from cabinet to cabinet. As part of the handles and pulls category, this edge pull functions as the primary operating grip on the front, letting users open and close doors and drawers without relying on recessed cutouts or push latches. The oil rubbed bronze finish suits projects calling for a dark metal accent along the edge, tying together panels, frames, and other bronze-finished components.
The exact 3 inch center to center spacing on this Emtek edge pull allows installers to reuse the same drilling templates wherever this pull is specified, which reduces layout variation and helps doors and drawers line up visually. The manufacturer part number 87100US10B and Emtek naming give shops a clear identifier to note on drawings and order lists, which supports straightforward reorders and consistent hardware across multiple rooms or phases of a project. Placing this part in the Emtek decorative hardware and handles and pulls classes confirms its role as visible operating hardware, which keeps design intent aligned between the specification, shop fabrication, and final installation. The oil rubbed bronze finish designation means the pull will present a bronze tone at all touched surfaces, which helps maintain a uniform look when matched with other oil rubbed bronze cabinet edge pull 3 inch pieces on the same job.
The Emtek Contemporary Edge Pull has a 3 inch center to center dimension, which sets the screw spacing and lets installers match it with other 3 inch pulls on a project.
The Emtek Contemporary Edge Pull is identified as a cabinet edge pull, so it is used on cabinet doors or drawers where the handhold is located right at the front edge.
The oil rubbed bronze finish on the Emtek Contemporary Edge Pull provides a dark bronze appearance, which lets it visually coordinate with other bronze-finished cabinet hardware.
The 3 inch center to center measurement gives installers a fixed drilling pattern, which supports use of standard jigs and consistent alignment across multiple cabinet fronts.
The number 87100US10B is the Emtek manufacturer part number for this edge pull, which provides an exact reference for specification and reordering.
This product is classified by Wurth Baer Supply in decorative hardware and moldings under handles and pulls, identifying it as visible operating cabinet hardware.
The Emtek Contemporary Edge Pull, 3 inch center to center, oil rubbed bronze, gives cabinet projects a defined edge-mounted grip that fits standard 3 inch layouts. The Emtek part 87100US10B sits within Emtek handles and pulls, so it ties into design schemes already built around Emtek decorative hardware. The oil rubbed bronze finish lets this pull match other bronze cabinet pieces, helping installers and fabricators deliver a coordinated run of doors and drawers. For jobs that call for a contemporary edge pull format in a dark bronze tone, this Emtek cabinet edge pull aligns the drilling pattern, appearance, and product identification in one part.
Sold In: 1 Each