Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Festool Granat profile sanding discs describe a 3 in x 4 in foam-backed abrasive starter set built for detailed sanding tasks. The discs use a soft 1/2 in (13 mm) PU foam core combined with Granat aluminum oxide abrasive, so the abrasive face stays supported while still flexing around contours. That construction lets the pads follow moldings, spindles, raised panels, and other decorative profiles without cutting flat spots. The Granat abrasive is designed for consistent, high-quality results on wood, paint, plastics, acrylics, fillers, and modern coatings, which means one set can stay in rotation across different substrates in the same project. As a starter set, this 578811 kit focuses on profile sanding where a rigid block or flat sheet would leave uneven areas. The soft foam core cushions the cut, helping produce smooth, professional results on both tough clear coats and more delicate surfaces.
This Festool Delta 3 in x 4 in Granat PROfile foam sanding discs starter set is designed around a soft, conforming interface rather than a rigid block. The 1/2 in (13 mm) PU foam core lets the abrasive follow edges and molded shapes, which matters when sanding spindles, raised panels, and decorative details where flat pads tend to bridge low spots. Because the foam backing molds to contours, the cutting surface stays in more uniform contact, helping produce even results along profiles. The aluminum oxide Granat abrasive is described for use on wood, paint, plastics, acrylics, fillers, and modern coatings, so the same pad format can move between bare material preparation and finish sanding on coated parts without changing the basic sanding setup.
This Granat profile foam sanding discs starter set is described as ideal for moldings, spindles, raised panels, and decorative details, so its 3 in x 4 in format and soft foam backing target shaped parts rather than broad, flat surfaces. The foam backing is designed to mold to contours, edges, and profiles, meaning it wraps slightly around curves instead of only touching at high points. That helps reach into coves and transitions on trim or door panels where standard abrasive sheets can leave untouched bands. Because the abrasive is suited to wood, paint, plastics, acrylics, fillers, and modern coatings, a single set can be used at different stages of a project, from shaping filler on detailed corners to refining coatings on decorative work.
The combination of a flexible PU foam core and Festool Granat aluminum oxide abrasive is presented as a way to deliver fast, consistent results on complex shapes. The 1/2 in (13 mm) foam layer supports the abrasive so pressure is spread more evenly, which helps limit harsh pressure lines on curved parts. That backing also allows the discs to conform to edges and profiles, contributing to smoother transitions where profiles change direction. Because the Granat abrasive is described as built for modern coatings and tough clear coats, it is aimed at maintaining a controlled scratch pattern on finished surfaces rather than cutting unpredictably. On delicate surfaces, the cushioning effect of the foam core works with the abrasive to produce smooth, professional results, which supports repeatable finish quality across detailed components in a production or serious DIY setting.
The Festool Delta 3 in x 4 in Granat PROfile foam sanding discs starter set is described for wood, paint, plastics, acrylics, fillers, and modern coatings, so it supports sanding tasks on both bare substrates and coated surfaces.
The Granat profile foam sanding discs use a soft PU foam backing that molds to contours, edges, and profiles, allowing the abrasive surface to stay in contact on molded shapes for more even sanding.
The Granat profile foam sanding discs are described as ideal for moldings, spindles, raised panels, and decorative details, so they target shaped and profiled components where flat abrasives do not follow curves well.
The Granat profile sanding discs use a 1/2 in (13 mm) PU foam core to support the abrasive, helping distribute pressure and maintain an even scratch pattern on complex surfaces.
The Granat profile foam sanding discs are described as built for modern coatings and tough clear coats, so they are intended to give controlled, consistent cutting on contemporary finish systems.
This profile foam sanding discs starter set is identified as Festool Delta 3 in x 4 in Aluminum Oxide Granat PROfile Foam Sanding Discs Starter Set with manufacturer part number 578811.
The Festool Delta 3 in x 4 in Aluminum Oxide Granat PROfile Foam Sanding Discs Starter Set 578811 combines a 1/2 in (13 mm) PU foam core with Granat abrasive to support contour and profile sanding. It is described for wood, paint, plastics, acrylics, fillers, and modern coatings, so it can stay in use across varied tasks on detailed components. For moldings, spindles, raised panels, and decorative details where shaped surfaces dominate the work, this starter set provides a foam-backed approach aimed at consistent, smooth results.
Sold In: 1 Set