Combi-Cam Ultra Dual Access Lock For Cabinets

Combi-Cam Ultra dual access lock is a 4-dial keyless combination cam and locker lock from Olympus Lock, Inc. that uses a 7/8 inch cylinder length and a 3/4 inch barrel diameter to secure doors or drawers in typical cam lock cutouts. The lock combines keyless 4-dial operation with a manager key override, so codes can be bypassed when a user forgets a combination or an employee leaves, keeping access under controlled management. Patented code discovery lets the active code be read from the lock itself, which supports fast recovery without drilling or replacing the body. The resettable mechanism lets the combination be set in three easy steps and offers up to 10,000 possible combinations, giving each user a unique code within the same facility standard. A heavy duty die cast metal construction provides a solid body, which supports repeated daily use in locker, cabinet, or drawer applications where a compact cam lock is needed.

Keyless Cam Lock Details That Support Daily Use

• The 4-dial combination cam and locker lock function provides keyless access, reducing dependence on physical keys while still allowing fast operation at the door or drawer.
• The manager key override feature allows the lock to be opened even when a user code is unknown, which keeps access control with supervisors during personnel changes.
• Patented code discovery makes it possible to read the existing code from the lock, so the combination can be reset to a new value without removing the lock body.
• The resettable design with up to 10,000 possible combinations gives flexibility for assigning unique codes, which supports shared installations with many individual users.
• The heavy duty die cast metal body construction provides a robust housing, which supports the cam and barrel during repeated locking and unlocking cycles on furniture.
• The 7/8 inch dual access keyless lock configuration and 3/4 inch barrel diameter fit common cam lock prep, simplifying layout on new installations or retrofit work.

Mounting And Cam Rotation For Doors And Drawers

The Combi-Cam Ultra 7445M-KA374 can be installed vertically on a door or horizontally on a drawer, so the same lock model can follow different cabinet layouts across a project. A 3/4 inch barrel diameter is designed for standard cam lock holes, which helps the barrel seat properly in typical panel thicknesses. The chrome 7/8 inch dual access keyless lock layout positions the cam to reach behind doors or into drawer frames while maintaining combination access at the front. A 1-1/2 inch long straight cam with dual holes is supplied for use in door or drawer applications, giving reach to common strike locations. The 90 degree stop cam placement allows the cam to rotate 90 degrees to the left or right, so the installer can orient rotation to match the preferred locking direction of the cabinet or locker run.

How This Combination Cam Lock Works In Practice

Using The Combi-Cam Ultra On Doors And Drawers

The 4-dial combination cam and locker lock layout lets users operate the Combi-Cam Ultra by spinning dials on the face, providing keyless entry on doors or drawers where controlling small keys adds work. The 7/8 inch cylinder length is suited to many cabinet doors and locker fronts where a compact lock body must sit flush, which helps maintain a clean appearance while still engaging the cam behind the panel. With vertical installation on doors and horizontal installation on drawers, one lock type covers mixed furniture layouts, reducing the number of different lock formats on a job. The 1-1/2 inch long straight cam with dual holes ties the barrel rotation to a strike or frame edge, so the same hardware can be planned for both door and drawer fronts within the same bank of cabinets.

Control, Reset, And Override For Repeatable Access

The manager key override on this Combi-Cam Ultra dual access lock means supervisory staff can always open the lock, which keeps control centralized even when individual users forget or abandon codes. Patented code discovery lets the actual code be recovered directly from the lock, so the combination can then be set to a new sequence without removing the unit from the panel, saving time during turnover. The resettable system with up to 10,000 possible combinations allows installers or facility managers to assign unique 4-dial settings across many users, helping to avoid repeated codes in high-traffic environments. Heavy duty die cast metal construction supports the cam, barrel, and dial mechanism through frequent operation, which suits locker rooms, storage cabinets, and similar use where combination locks see repeated daily use.

Common Questions About The Combi-Cam Ultra Lock

Selecting This Lock For Keyless Door Or Drawer Control

The Combi-Cam Ultra dual access lock from Olympus Lock, Inc. combines a 4-dial keyless cam and locker lock layout with a manager key override and patented code discovery, giving both users and supervisors controlled access. The 7/8 inch cylinder length, 3/4 inch barrel diameter, and 1-1/2 inch straight cam support typical door and drawer applications where a compact cam lock is expected. When a project calls for keyless access with recoverable codes and straightforward door or drawer mounting, this 7445M-KA374 configuration provides a practical option for lockers, cabinets, or storage furniture.