Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune 1652-S is a stainless steel bar pull from the 16 Series, designed for wide cabinet doors and drawer fronts that take a longer span of grip hardware.
A 12-5/8 inch center-to-center spacing covers ground that most kitchen and bath pulls simply cannot span. It suits wide base drawers, two-door pantry fronts, and large island drawer banks where a shorter pull would look undersized or require off-center placement. The 342 mm overall length is only slightly larger than the hole spacing, which keeps the pull from overhanging the front by more than a few millimeters on either side. That tight ratio gives the hardware a clean, deliberate look rather than the busy appearance a shorter grip with long posts can produce on a wide front.
Stainless steel as both the base material and the finish means the surface tone and the structural material are the same throughout, which is relevant in environments where a plated finish would wear unevenly over time. The bar cross-section is 1/2 inch wide, which reads as a fine, linear element at this scale rather than a heavy one. That proportion suits contemporary and transitional cabinetry where the hardware is meant to frame the front rather than dominate it. The Stainless Steel finish sits in the Silver Tone color family, so it coordinates naturally with brushed nickel and chrome fixtures without requiring an exact match.
This is the right pull for a project running wide cabinetry at an architectural scale: a floor-to-ceiling pantry column, a 36-inch or wider base drawer, a furniture-style island with deep drawer fronts, or a media cabinet with broad horizontal panels. Cabinet shops specifying hardware across a full kitchen will find the 16 Series useful precisely because it is offered across a range of center-to-center sizes, making it possible to run the same profile and finish on narrow drawers and wide doors without switching families. Designers working in a stainless or silver-tone scheme can carry this pull through multiple cabinet types without the finish diverging from one size to the next.
The overall length is 13-7/16 in (342 mm) and the center-to-center is 12-5/8 in (320 mm), so the pull extends roughly 7/16 inch beyond each hole center at the ends.
The finish is listed as Stainless Steel. Sugatsune's 16 Series stainless pulls carry a brushed satin surface typical of the line, but confirm the exact surface texture against the manufacturer's documentation for your project spec.
The 16 Series is offered across multiple center-to-center sizes in the same profile and finish, so different sizes within the series coordinate on a single installation.
The source data does not include an outdoor or weather-resistance rating for this pull. For exterior applications, confirm suitability with the manufacturer before specifying.
At 320 mm centers, this Sugatsune pull gives wide fronts the hardware scale they need without adding visual weight that the cabinetry cannot carry.