Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune 16 Series pull is a stainless steel bar pull designed for wide cabinet drawer fronts, pantry doors, and large panel openings that call for hardware at this scale.
At 15-7/16 inches between centers, this pull is sized for the fronts in a kitchen or built-in where a standard 5 or 6 inch pull would look undersized. Wide pot drawers, full-height pantry doors, appliance-garage fronts, and oversized island drawers are the natural fits. On a front that runs 18 inches or wider, hardware at this center-to-center reads in proportion to the panel rather than floating at one corner of it. It is also a practical choice for a two-drawer bank where the hardware aligns across a wide face, or for any built-in where the pull doubles as a visual rail across the front of the cabinet.
The bar and posts are stainless steel, which means the metal runs through — not a zinc or aluminum core with a steel-toned coating over it. Stainless holds its appearance in conditions that wear a plated finish down over time: humid kitchens, high-touch applications, and commercial-grade environments where the hardware sees more hands per day than a residential cabinet does. The bar section is 1/2 inch wide, keeping the silhouette narrow relative to the pull's length. That proportion suits a contemporary or transitional program where the hardware should read as a line across the front rather than as a thick architectural element.
Designers specifying a contemporary kitchen with oversized fronts reach for this pull when the hardware program needs to hold scale across a wide panel without going to a full appliance-style grip. Cabinet shops building furniture-grade pieces with wide drawer banks use it where the center-to-center is specified by the designer and the job calls for genuine stainless rather than a stainless-look finish. Contractors installing high-use cabinetry in kitchens, hospitality spaces, or commercial millwork applications will find the material straightforward to spec and easy to source when the project calls for this center-to-center in a durable metal.
The center-to-center, 15-7/16 inches (392 mm), is the distance between the two mounting holes and is the number you match to your existing holes or your drilling template. The overall length, 16-5/16 inches (414 mm), is the full end-to-end size of the pull including the posts and any overhang past the holes.
Yes. The Material Type is stainless steel, not a plated or coated finish over a different base metal.
The 16 Series is available at multiple center-to-center spacings, from compact to oversized. This variant is the 15-7/16 inch (392 mm) version.
The source data does not confirm included fasteners for this pull. Confirm what ships in the package before ordering if screws are required for your installation.
When the front is wide enough to need 15-7/16 inches between centers, this pull delivers the right spacing and the right material in a narrow bar profile that keeps the look clean.