Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sugatsune CSD Series Soft-Down Stay is a lid support designed for downward-opening flap doors, so it controls how a small door in a media center or TV console moves as it opens and closes. The stay is specified with 8.8 - 17.7lbs in torque, which defines the working range of flap door height and weight it is designed to handle during operation. This model is described as soft-down, so it moderates the opening motion of the flap door instead of letting it drop as the hinges pivot. The product is identified as CSD-10-TV-L-WT from Sugatsune America, so it matches that specific installation detail on drawings or parts lists. The SAP description notes CSD STAY, DOWN OPEN, 8.8-17.7 TORQ, WHT, which confirms that this stay is intended for a down-opening action in a white finish.
The soft-down stay is described as easy to install by aligning the body to the edge of a cabinet, so mounting work focuses on locating the stay body along that cabinet edge line during layout. The description specifies that it can be used with piano, butt, or drop hinges, so the stay works alongside these hinge types when the flap door is assembled. The opening speed is identified as adjustable, with an adjustment screw located on the back of the stay body, so opening motion can be tuned after mounting while the visible face remains clean. The note that the adjustment screw is on the back for a clean appearance means the visible side of the flap interior remains uncluttered by exposed adjustment points.
The web description identifies this product as a soft-down stay for downward-opening flap doors, so it is intended for doors that pivot down from the cabinet front. It is described as designed for smaller cabinet doors in media centers or TV consoles, which places its typical use on lighter front panels over electronics or storage. The category listing as Lid Supports and Stays connects it to lift systems and lid support roles, so it functions as a controlled-motion support within that hardware class. The SAP description specifies down open, indicating motion direction, so the stay is set up for doors that swing down rather than lifting upward. Because it is described as holding the lid in the closed position, it contributes to keeping the flap shut on cabinets built for media or similar storage.
The stay is specified with 8.8 - 17.7lbs in torque, so the hardware operates within that torque band when paired with smaller flap doors. The torque formula is stated as Torque = Door Height x 1/2 x Door Weight, so installers can calculate the load characteristics of a given flap using the door height and weight values. Using that torque calculation helps relate a specific front size and material weight to the stay's rated torque range in planning. The description notes that opening speed is adjustable using an adjustment screw located on the back, so after the stay is mounted, the flap opening rate can be tuned from that hidden screw side. Because the adjustment screw is on the back for a clean appearance, the visible interior surface around the stay looks more finished while still allowing access for fine-tuning during setup or later adjustments.
The Sugatsune CSD Series Soft-Down Stay is described for downward-opening flap doors, so it serves flap fronts that pivot down on a cabinet face.
The soft-down stay is described as designed for smaller cabinet doors in media centers or TV consoles, so it fits typical entertainment or electronics cabinet fronts.
The CSD-10-TV-L-WT soft-down stay is specified at 8.8 - 17.7lbs in torque, defining the operational range for suitable flap door height and weight combinations.
The soft-down stay uses an adjustment screw located on the back to set opening speed, so the door motion can be tuned while the visible side stays clean.
The description notes use with piano, butt, or drop hinges, so the soft-down stay operates alongside these hinge types on the same downward-opening flap door.
The torque calculation Torque = Door Height x 1/2 x Door Weight links flap dimensions and weight to the stay's torque rating, supporting selection within the 8.8 - 17.7lbs in range.
The Sugatsune CSD Series Soft-Down Stay in model CSD-10-TV-L-WT provides a soft-down action for smaller downward-opening flap doors in media centers or TV consoles, within its 8.8 - 17.7lbs in torque range. Its use with piano, butt, or drop hinges aligns the stay with common hinge options on these cabinets. The adjustable opening speed, set by the back-mounted screw, allows tuning flap motion while keeping the visible face simple and white. For projects that match this torque band and down-opening layout, this soft-down stay offers a defined solution for controlled flap movement and closed-position hold.