Sugatsune HES2S Series 1-3/8" Door Thickness Adjustable Surface Mount Concealed Hinge, White, - HES2S-150-A110-WT

Sugatsune HES2S Concealed Hinge For 1-3/8 Doors

Sugatsune HES2S concealed hinge provides a surface mount, invisible hinge solution for 1-3/8 inch (35 mm) thick doors, so you can build clean cabinet and door lines while keeping the hardware hidden in the frame. This hinge surface mounts to the door frame, which simplifies layout because you do not need deep mortising in the frame to hang the door. The hinge is designed for doors with a minimum thickness of 1-3/8 inch (35 mm) or more, matching common interior and cabinet door construction so you can apply it to many wood door projects. The max opening angle is 110 degrees, which gives wide access to the cabinet or opening while still controlling travel, important for clearance around nearby walls or face frames. This model is finished in white, which blends into painted white frames and doors where any visible edge of the hinge sits close to the surface.

Key Working Advantages Of This Concealed Hinge

• The hinge surface mounts to the door frame, which speeds installation on solid frames because it reduces the amount of material removal at the frame and keeps layout focused on accurate screw positioning.
• A minimum door thickness of 1-3/8 inch (35 mm) means the hinge is suited to many full-thickness wood doors, helping you standardize on one door build without changing construction for this hardware.
• A maximum opening angle of 110 degrees lets the door swing open widely for access while still limiting travel, which helps protect nearby components when used with a separate door stopper to prevent overextension.
• Center mounting the hinge on a 1-3/8 inch (35 mm) door allows the door to be installed as either a right-handed or left-handed door, giving flexibility on site when swing direction must follow room layout.
• Door weight capacity of maximum 88 lbs with 2 hinges supports many medium-weight doors, so two hinges can handle substantial solid doors without changing the hinge type.
• Door weight capacity of maximum 110 lbs with 3 hinges provides additional support for heavier doors, allowing you to scale hinge count to door weight while keeping the same hinge model.

Surface Mount And 3D Adjustment For Precise Fit

This surface mount concealed hinge attaches to the door frame, which streamlines hinge placement because you work from the face of the frame instead of deep recesses. The hinge offers 3D adjustment - vertical, horizontal, and depth - so you can fine tune the door position after hanging to achieve consistent gaps and smooth movement. Vertical adjustment lets you shift the door up or down relative to the frame, helping align multiple doors in a run. Horizontal adjustment allows side-to-side tuning, which is useful for dialing in reveals along the latch side or between paired doors. Depth adjustment moves the door closer to or farther from the frame, so you can correct for minor variations in door thickness or frame straightness.

Using This Invisible Hinge In Door Projects

Where This Surface Mount Hinge Fits Best

This Sugatsune America HES2S-150-A110-WT hinge is part of the HES2S Series, placing it in a family of concealed hinges suited to applications where the hardware stays out of sight. As an invisible hinge in the Invisible and Recessed Hinges category, it works well in projects where a clean, uninterrupted door appearance is important. The minimum 1-3/8 inch (35 mm) door thickness spec makes it appropriate for many interior-style and thicker cabinet doors, so it can be used in built-in cabinetry, closets, or similar openings that use solid or laminated doors. By surface mounting to the door frame, it adapts to solid wood frames commonly found in custom millwork, since the installer can work directly on the face of the jamb or casework stile.

Center mounting this hinge on a 1-3/8 inch (35 mm) door allows the same hardware to function for both right-handed and left-handed doors, which helps streamline door planning when the final swing direction depends on room constraints. The maximum opening angle of 110 degrees supports use in situations where doors must open wide for access but remain clear of adjacent cabinetry or walls. Door weight capacity of maximum 88 lbs with 2 hinges and maximum 110 lbs with 3 hinges means the hinge can serve light to fairly heavy doors by adjusting hinge count per door, so the same model can be applied across a range of sizes. The 3D adjustment capability - vertical, horizontal, and depth - supports fine alignment work, enabling consistent reveals along the frame and reliable closing action even when the frame or door varies slightly within normal woodworking tolerances.

Common Questions About This Sugatsune HES2S Hinge

Choose This Hinge For Clean, Adjustable Door Installs

The Sugatsune HES2S concealed hinge, model HES2S-150-A110-WT, brings an invisible hinge solution that surface mounts to the frame, so you can build clean-lined doors without exposed knuckles. With support for minimum 1-3/8 inch (35 mm) thick doors, defined door weight ranges using 2 or 3 hinges, and a 110 degree max opening angle, it fits a wide range of interior and cabinet door projects. Its 3D adjustment in vertical, horizontal, and depth directions helps dial in precise reveals after hanging, reducing rework when aligning multiple doors. For white projects where concealed hardware and adjustable fit matter, this hinge aligns well with professional woodworking and installation workflows.