Sugatsune MC-JM38 magnetic catch gives a 3.3lbs magnetic force in a compact form, providing positive holding power for light doors or panels where low closing pressure and controlled retention support consistent alignment in everyday use.
The ultra-thin design with 1/8 inch (3.2 mm) thickness allows the catch to fit where standard catches are too bulky, helping installers maintain clearances on slim doors, flush panels, and tight cabinetry layouts without redesigning surrounding parts.
A built-in neodymium magnet provides strong magnetic force relative to size, so the catch delivers dependable holding strength while keeping the overall hardware footprint small for compact or space-restricted assemblies.
The hermetically sealed construction keeps the internal magnet isolated from the environment, which supports performance in high corrosion environments such as areas exposed to moisture, cleaning chemicals, or corrosive atmospheres over the life of the installation.
The white plastic body provides a neutral, clean appearance that blends with white casework or equipment housings, helping hardware visually recede in healthcare, food equipment, or other clean-focused interiors where exposed metal is less desirable.
No metal-to-metal contact in the design means the latch action avoids direct metal impact, which supports quieter operation and reduces marking on mating surfaces in cleanroom applications and similar controlled environments.
The easy-to-clean, entirely waterproof construction allows the catch surface to be washed down or wiped in food equipment and other wet-area use, supporting hygienic maintenance routines where fluid contact and frequent cleaning are part of normal operation.
The ultra-thin 1/8 inch (3.2 mm) thickness of this magnetic catch influences installation by allowing it to sit between door and frame with minimal gap change, so installers can maintain tight reveals and alignment while still adding magnetic holding at the closing point.
The hermetically sealed, waterproof body means the catch can be positioned in areas subject to moisture or washdown without exposing internal magnet surfaces, helping preserve magnetic performance around wet-process equipment or in humid service locations.
No metal-to-metal contact in the operating design reduces mechanical impact between components during closing, which supports smoother operation and can lessen surface marring on the mating part in applications that cycle repeatedly.
The white plastic housing coordinates with white cabinetry or equipment, giving installers a visually consistent hardware choice where exposed components need to blend into light-colored casework or enclosures.
The ultra-thin 1/8 inch (3.2 mm) profile suits doors and panels where space between moving and fixed parts is tight, allowing the Sugatsune MC-JM38 magnetic catch to fit into slim reveals without forcing changes to door thickness or overlay alignment.
The hermetically sealed construction targets high corrosion environments, so the catch works well on access panels and small doors in areas exposed to moisture, chemical cleaning, or corrosive atmospheres where unsealed hardware can degrade over time.
No metal-to-metal contact and the clean white plastic body support use in cleanroom applications, where non-marking contact and a low-particulate interface help maintain clean operating conditions around controlled cabinetry and equipment hatches.
The entirely waterproof, easy-to-clean design makes this magnetic catch suitable for food equipment, where surfaces are routinely washed or wiped, helping doors and covers stay latched while meeting ongoing sanitation demands during normal operation.
The 3.3lbs magnetic force works for light to moderate doors and panels that need a defined closing pull without high opening resistance, supporting use on small service doors, inspection covers, and similar access points.
The ultra-thin body lets installers place the neodymium magnet close to the strike area, which improves holding efficiency and helps maintain even gasket compression or edge contact when doors close against frames or stops.
The neodymium magnet provides strong magnetic force from a small contact area, which allows the catch to maintain grip even when mounted discretely, reducing the need for larger visible hardware on equipment fronts and cabinet faces.
Hermetic sealing restricts environmental exposure of internal parts, helping the magnet continue to perform in high corrosion environments where condensation, splashes, or aggressive cleaners could otherwise attack unsealed components.
No metal-to-metal contact in the system reduces impact wear between the catch and mating surface, supporting smoother closing over repeated cycles and helping surfaces stay cleaner in applications sensitive to abrasion or particle generation.
The waterproof, easy-to-clean plastic surface simplifies wipe-down routines in food equipment and similar installs, since the exterior can be washed without concern for fluid entry, keeping the magnetic function consistent through cleaning cycles.
The white finish provides a neutral, technical look that integrates with white casework and equipment housings, allowing the catch to serve its function without drawing attention, which is helpful in cleanroom or food-service layouts.
The optional counterplate sold separately in the plastic sealed MC-JMP45WT version gives installers a matched plastic interface, supporting a fully non-metallic contact set where cleanroom magnetic catch performance and easy cleaning are priorities.
The alternative plastic sealed MC-JMP45BL counterplate option offers a different visible color while maintaining a sealed plastic contact surface, letting hardware appearance coordinate with darker equipment or cabinetry while preserving the same functional interface.
The Sugatsune MC-JM38 magnetic catch has a 3.3lbs magnetic force, providing a defined pull for light doors or panels where a moderate closing hold is needed.
The catch has an ultra-thin design with 1/8 inch (3.2 mm) thickness, allowing installation in tight gaps and slim door arrangements.
The hermetically sealed construction isolates the neodymium magnet, supporting performance in high corrosion environments with moisture or chemicals.
This magnetic catch has no metal-to-metal contact and a sealed plastic body, which suits cleanroom applications needing non-marking, easily cleaned hardware.
The entirely waterproof, easy-to-clean design makes this catch suitable for food equipment, supporting regular washdown and sanitation routines.
Optional counterplates sold separately are the plastic sealed MC-JMP45WT and MC-JMP45BL, giving coordinated sealed plastic mating surfaces.
The Sugatsune MC-JM38 magnetic catch combines a 3.3lbs magnetic force, ultra-thin 1/8 inch (3.2 mm) profile, and neodymium magnet, giving installers a compact solution when projects need firm latching without bulky hardware around slim doors or panels.
The hermetically sealed, waterproof white plastic body with no metal-to-metal contact supports use in high corrosion environments, cleanroom areas, and food equipment, so this catch can align with demanding sanitation and corrosion-resistance requirements on specialized jobs.
With optional plastic sealed counterplates MC-JMP45WT and MC-JMP45BL sold separately, this catch supports a coordinated magnetic interface that fits clean, low-profile cabinet, enclosure, or equipment latching layouts.