Sugatsune MC-YN001P Series 1-3/8"W x 9/16"H Oval Steel Counterplate, Nickel Finish, - MC-YN001U

Sugatsune MC-YN001U Counterplate For Magnetic Catch

Sugatsune MC-YN001U counterplate is an oval steel strike plate designed for the Sugatsune MC-YN001P magnetic catch, so the magnet has a matching steel target, which helps doors seat consistently where this pair is specified. The 1-3/8 inch wide size gives the catch a defined engagement zone, which supports repeatable alignment on the door or frame. The 9/16 inch height keeps the counterplate compact, which suits smaller doors or tight face-frame layouts. The oval shape provides a smooth perimeter, which can help the counterplate present a clean edge where the door contacts it. The steel construction gives the magnetic catch a solid mating surface, which supports the holding function of the Sugatsune magnetic system. The nickel finish provides a uniform metallic appearance, which helps this counterplate blend with other nickel-finished hardware in the same installation.

Key MC-YN001U Details For Daily Use

• The 1-3/8 inch width defines the contact area for the MC-YN001P magnetic catch, which helps the magnet engage reliably when the door closes in normal use.
• The 9/16 inch height keeps the counterplate low-profile, which helps it fit visually and physically on smaller doors or cabinet faces with limited space.
• The oval geometry gives the counterplate rounded ends, which can help reduce sharp transition points where the door meets the strike location.
• The steel material provides a ferrous surface for the Sugatsune magnetic catch, which is necessary for the magnet to create a holding force at the strike point.
• The nickel finish creates a consistent metallic look on the exposed surface, which helps coordinate with other nickel hardware components in the same area.
• The design as a counterplate for MC-YN001P ties this part directly to that magnetic catch model, which helps installers match parts correctly in a Sugatsune catch system.

Counterplate Size And Fit For MC-YN001P Catches

The specified 1-3/8 inch width of this Sugatsune MC-YN001U counterplate gives installers a clear dimension when laying out the mating point for the MC-YN001P magnetic catch, which streamlines planning of door and frame contact locations. The 9/16 inch height provides a compact footprint, which can simplify positioning on narrow rails or stiles. The oval form gives a recognizable outline for marking and drilling patterns, which can help maintain consistent strike placement across multiple cabinet doors using the same magnetic catch series.

Using This Counterplate In Catch Installations

Where The MC-YN001U Counterplate Is Applied

This Sugatsune MC-YN001U counterplate is designed to be used with Sugatsune magnetic catches, specifically identified as the counterplate for MC-YN001P, which positions it as the steel strike element in that catch pair. In practice, this means it is mounted at the point where the door or panel meets the MC-YN001P magnetic catch, so the magnet seats directly against its oval steel face. The 1-3/8 inch width provides enough surface for the magnet to land within its intended zone, which is useful on cabinet doors where tolerance for misalignment is limited. The 9/16 inch height keeps the strike area compact, which is helpful when working with face frames, narrow rails, or inset doors that offer only a small landing area for the strike component.

Why MC-YN001U Details Support Consistent Results

The steel construction of the MC-YN001U counterplate works with Sugatsune magnetic catches by offering a ferrous surface, which allows the MC-YN001P magnet to perform its holding function each time the door closes. The nickel finish provides a clean, metallic appearance on the exposed side, which helps installations maintain a uniform look when multiple catches and counterplates are used in the same run of cabinetry. The defined 1-3/8 inch by 9/16 inch oval profile gives installers predictable dimensions to repeat across a project, which supports efficient layout when several doors rely on the same MC-YN001P and MC-YN001U combination. Because it is specifically identified as the counterplate for MC-YN001P, the part number link helps reduce mismatch between catch and strike components, which supports consistent performance across all doors using this Sugatsune magnetic catch series.

Common Questions About The MC-YN001U Counterplate

Select The MC-YN001U For Matched Catch Systems

The Sugatsune MC-YN001U counterplate pairs directly with the MC-YN001P magnetic catch, which helps align catch and strike components around a known part combination. The 1-3/8 inch by 9/16 inch oval steel plate with nickel finish provides a defined, ferrous target that supports the holding function and appearance of Sugatsune magnetic catches on cabinet doors and similar applications. Sourcing this MC-YN001U counterplate from Wurth Baer Supply connects the specified Sugatsune component to a distributor focused on the woodworking trade, which supports consistent product selection across projects.