Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune SN-150BL is a stainless steel edge pull from the SN Edge Series, designed for cabinet drawers and doors where a surface-mounted pull is not the right choice. Its L-shaped profile grips from the edge or face of the front with 2-1/4 inch (57 mm) center-to-center three-hole mounting.
The 2-1/4 inch (57 mm) center-to-center spacing is the middle step in the SN Edge Series lineup, which is where it earns its place on mid-width drawer fronts: wide enough to provide a stable three-point grip, compact enough to leave room on a narrower front without crowding the edge. At 5-7/8 inches overall, the pull sits comfortably on a standard base drawer or an upper door where a longer pull would look oversized. If you are replacing existing hardware drilled to 57 mm centers, this pulls drops onto those holes directly. If you are drilling new, the three-hole pattern spreads the load across the front in a way a two-hole pull does not, which matters on thinner drawer faces.
The SN-150BL is machined from 304 stainless steel, a grade that resists corrosion in normal indoor environments and holds its form under daily use better than zinc or aluminum at the same wall thickness. The Matte Black finish gives the stainless a low-sheen surface that reads as solid black rather than metallic, which suits contemporary and transitional cabinetry where the hardware is meant to sit quietly against a dark or light front. The L-profile's flat face keeps the finish in view rather than hiding it in a shadow, so the matte surface does visual work even on fronts where the pull blends in.
This pull is a natural fit for cabinet shops and designers specifying a handle-forward edge-pull system on European-style or slab-door cabinetry, where a projecting bar pull would interrupt a flush plane. It is equally suited to a homeowner replacing a single drawer pull drilled to 57 mm centers without touching the rest of the front. The SN Edge Series spans several center-to-center sizes, so the same design language is available for smaller drawer boxes and wider panels in the same run, which makes it easier to spec a consistent look across a full kitchen without mixing collections.
Three holes, at 2-1/4 inch (57 mm) center-to-center spacing. The three-hole pattern differs from the two-hole pattern most standard bar pulls use, so confirm your existing drilling or lay out new holes to match before ordering.
Yes. 304 stainless steel handles humidity, cleaning products, and normal daily contact well in indoor kitchen and bath applications.
The L-profile is designed to mount on the face of the door or drawer front, with the grip returning toward the surface. Check the SN series installation documentation for the specific orientation and screw specification for your front thickness.
Yes. The SN Edge Series includes multiple center-to-center sizes, so you can spec a consistent design across different drawer and door widths in the same cabinet run.
Choose this pull when the drawer or door is drilled to 57 mm centers and the project calls for a stainless L-profile in matte black that coordinates with other sizes in the same series.
Sold In: 1 Each
