Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune SN-70/BL is a stainless steel edge pull from the SN series, designed for cabinet doors and drawer fronts where mounting space is limited and a clean, minimal profile is the goal.
The 1-13/16 inch center-to-center puts this pull in a bracket of its own within the SN family. At that spacing, it suits narrow drawer fronts, small door panels, and inset applications where a larger pull would crowd the face or overlap an adjacent piece of hardware. It is also the right answer when existing holes are already drilled at 46 mm and a replacement pull that drops straight on is what the job requires. Cabinet shops working on compact upper cabinets, appliance garages, or furniture-scale pieces will recognize this spacing as the one that solves the tight-front problem without asking for custom drilling.
The pull is built from 304 stainless steel, a material grade chosen for its dimensional stability and resistance to surface degradation under normal indoor conditions. The Matte Black finish sits flush in tone without the glare that a polished surface would introduce. On a slab or flat-panel front, a matte black L-pull tends to read as part of the geometry rather than as added hardware, which is consistent with the minimal aesthetic the SN series is designed to support. The L-shape profile itself contributes to that effect by hugging the surface rather than projecting a post and bar across it.
This pull suits designers and cabinet makers working in contemporary or minimalist interiors where hardware should be present functionally but recede visually. The compact 46 mm hole pattern is particularly useful in multi-drawer configurations where fronts are narrow and even a 3 inch pull would look oversized. It is also a practical specification for small-space kitchens, custom furniture with integrated cabinetry, and commercial millwork where clean lines and precise dimensions are part of the design brief. Because the SN series spans multiple center-to-center sizes, designers running a coordinated hardware program across a cabinet run can match this pull to the wider variants in the same collection for fronts of different scales.
It is the distance between the centers of the two mounting holes. Drill two holes 1-13/16 inches apart on center to mount this pull. The overall length of 2-3/4 inches is larger and is not the drilling dimension.
304 stainless performs well in typical indoor conditions including bathrooms. The source data does not include a rated exterior or marine-grade environmental classification for this SKU, so it is best treated as an interior product.
The L-profile is designed for face mounting, with the grip standing off the door or drawer front on the two posts at the stated projection. It is not a true edge-mount that wraps over a physical edge unless the installation is configured that way by the cabinetmaker.
Yes. The SN series is available in multiple center-to-center sizes in the same Matte Black finish, so the same design language can carry across fronts of different widths.
When the front is narrow and the hole pattern is already set at 46 mm, this pull is the specification that works without compromise on either dimension or finish.
Sold In: 1 Each
