Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune SNB-70/BB is a solid brass edge pull designed for cabinet doors and drawer fronts where the mounting holes fall on tight 1-13/16 inch (46 mm) centers. Its L-shaped profile delivers a clean grip in a compact footprint, finished in Bright Brass.
Most bar pulls in a standard kitchen run on 96 mm or 128 mm centers, but not every cabinet does. Small doors on upper cabinets, shallow drawer fronts on a built-in desk or media unit, and narrow pull-out panels on a bathroom vanity can all end up drilled at a tighter spacing where the longer pulls simply will not land. The 1-13/16 inch (46 mm) center-to-center on this pull is the fit spec for exactly those situations. If the existing holes are already at this spacing, the pull drops in without re-drilling. If the job is new construction, this spacing keeps the hardware scaled to a narrower front rather than overwhelming it with a bar sized for a deep drawer.
The SNB-70/BB is made from solid brass, which gives it a noticeably different feel than a plated zinc pull of similar size. Brass carries more weight for its volume, and that density translates to a pull that feels deliberate rather than lightweight when the hand closes on it. The Bright Brass finish is a polished surface, meaning it picks up and reflects light along the flat planes of the L profile. On warm-toned cabinetry it reads as a classic hardware choice; against painted or lacquered fronts it introduces a point of contrast. A polished surface will show finger contact more readily than a brushed or matte finish and wipes clean with the same ease.
This pull is the right choice when the center-to-center is the constraint. Replacement projects on existing cabinetry drilled at 46 mm centers have few options at this spacing, and solid brass narrows the field further. For new work, designers specifying a furniture-style built-in, a collector's cabinet, or a fitted bathroom piece often want hardware that reads as a detail rather than a standard fitting, and the L-profile of the SNB series reads that way. Because the SNB family spans multiple center-to-center sizes in the same design language and finish, it is also a practical choice when one project mixes fronts of different widths that need different spacings but the same look.
No. 1-13/16 inch (46 mm) is slightly larger than 1-3/4 inch (44 mm). These are different hole patterns and the two pulls are not interchangeable. Measure between the centers of existing holes before ordering.
The L profile is oriented so the horizontal leg of the L sits against the door face while the vertical leg projects outward, creating a ledge the fingers close around from the side or front. It is a finger-pull style rather than a full-hand bar grip.
Yes. The SNB series is offered across multiple center-to-center spacings in the same profile and finish, so companion pieces are available for fronts drilled to different spacings on the same project.
Brass is denser than zinc, so the pull has more physical weight, but the two-hole mounting method is standard and no special fasteners are required beyond what the mounting holes accommodate.
When the center-to-center is 1-13/16 inches and the finish is Bright Brass, this Sugatsune SNB pull covers both without compromise.
