Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sugatsune SND edge pull gives a slim gripping point at the cabinet or drawer edge, so you can open fronts without a protruding handle taking up space. The pull is part of the Sugatsune SND Edge Series, which keeps hardware lines consistent on a project. The center to center dimension is 46 mm, so hole locations are fixed for repeatable layout across multiple fronts. The pull uses 304 stainless steel, providing a solid metal body for everyday cabinet use. Overall length is 70 mm, which keeps the pull visually compact while still giving room for fingers to grab. Projection is 60 mm, so the grip stands out far enough from the edge for practical use. A mirror finish on the 304 stainless steel gives a reflective surface that ties into polished decorative hardware schemes.
The 46 mm center to center spacing of the Sugatsune SND edge pull defines where fastening points fall relative to the door or drawer edge, giving a fixed reference for jigs and drilling setups. With a 70 mm overall length, the pull occupies a short section of the edge, leaving room to position multiple pulls on wider fronts when needed. The 60 mm projection sets the stand-off from the cabinet face, which influences how the pull clears adjacent doors and front reveals. Using 304 stainless steel for the body keeps the gripping section consistent from pull to pull, supporting uniform alignment when installing a series of SND Edge Series pulls on one project.
The Sugatsune SND edge pull works as a handle solution on cabinet doors or drawers where a compact pull at the edge is preferred. The 70 mm overall length suits smaller fronts or minimal designs that call for short, discreet hardware. A 46 mm center to center dimension makes the pull suitable wherever that mounting pattern matches the drilling plan. The 60 mm projection gives a defined gripping zone along the edge, making it practical on doors or drawers that see frequent use. With 304 stainless steel as the base material, the pull fits into woodworking projects that specify metal decorative hardware and need a consistent finish and feel across multiple openings.
The SND-70/M edge pull uses a 46 mm center to center spacing, so once a drilling setup is established, the same pattern can be repeated across cabinets for dependable alignment. Its 70 mm overall length allows installers to position the pull so it clears neighboring hardware and still provides enough edge coverage for a secure grip. The 60 mm projection defines how far fingers sit from the door or drawer face, contributing to a predictable user feel when multiple SND Edge Series pulls are used in a room. Because the pull uses 304 stainless steel with a mirror finish, every piece in a series presents the same reflective surface, supporting a uniform appearance when aligning handles and pulls on a full bank of cabinets.
The Sugatsune SND edge pull has a 46 mm center to center dimension, which sets the fixed spacing between mounting points for consistent hole drilling.
The Sugatsune EDGE PULL 70MM has a 70 mm overall length, so it covers a short section of the cabinet or drawer edge while staying visually compact.
The SND-70/M edge pull has a 60 mm projection, giving defined stand-off from the surface for hand clearance at the edge.
The SND-70/M edge pull is made from 304 stainless steel, providing a solid metal body for the gripping area on doors and drawers.
This Sugatsune SND edge pull has a mirror finish on the 304 stainless steel, giving it a reflective look suited to polished decorative hardware layouts.
The Sugatsune SND edge pull belongs to the SND Edge Series and uses a mirror finish, so it aligns visually with other polished handles and pulls in the same space.
The Sugatsune SND edge pull SND-70/M combines a 46 mm center to center dimension with a compact 70 mm overall length, giving a defined drilling pattern in a small footprint. A 60 mm projection and 304 stainless steel body shape the feel at the gripping point. The mirror finish supports polished decorative hardware schemes where every pull needs to match. For cabinet or drawer fronts that call for edge-mounted hardware with consistent dimensions, this SND Edge Series pull provides a clearly defined sizing and finish combination ready to specify by part number.
