Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune SP-38/S is a 1-7/8 inch (47 mm) square recessed pull in satin stainless steel, designed for cabinet doors and drawer fronts where the hardware should sit inside the surface rather than stand away from it.
A recessed pull installs into a machined pocket rather than through two drilled holes. The result is a grip that sits at or just below the face of the front, leaving no hardware projecting into the opening path of adjacent doors or drawers. At 47 mm square, this size is well suited to mid-width drawer fronts and smaller cabinet doors where a larger recessed opening would look out of proportion. The near-zero projection also makes it the right choice for pairs of doors that meet in the center: there is nothing to catch or interfere when both panels close.
The pull is made from 304 stainless steel, the alloy chosen for its strength and resistance to surface deterioration in interior environments. The Satin Stainless Steel finish is a brushed surface that diffuses light evenly across the square face, avoiding the hard reflections a polished finish would produce in a kitchen or bath. The finish is consistent from the rim to the finger recess, so there is no contrast between the outer frame and the interior grip.
This pull is a natural choice for contemporary and minimalist cabinetry where the design brief calls for hardware that disappears rather than reads as a separate element. It suits frameless European-style boxes, flat slab fronts, and any run of cabinetry where doors and drawers stack closely together. It is equally at home in a bath vanity or a media cabinet as in a kitchen, because the flush profile and neutral satin finish carry across applications without needing to match a separate hardware program.
The pull is 1-7/8 inches (47 mm) square. The routed pocket must be sized to that footprint plus any clearance the installer requires for a clean fit. Sugatsune's installation documentation for the SP series specifies the exact pocket depth and dimensions.
At 47 mm square it is a mid-range size within the SP series, proportioned well for drawer fronts in the 12 to 18 inch width range as a practical matter, though sizing is ultimately a design decision.
Yes. A recessed pull works on a door front provided the pocket can be routed without breaking through to the back of the panel. Minimum material thickness is determined by the pocket depth the SP series requires.
Satin Stainless Steel is the finish name for this pull, but satin stainless finishes vary between manufacturers. A physical sample comparison is the reliable way to confirm a match before specifying across brands.
Choose the SP-38/S when the cabinetry design calls for a mid-size grip that routes into the front and reads as part of the surface rather than as something attached to it.