Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sugatsune TLP Series push knob gives you a compact catch that locks the door when the knob is pushed in, so you get a clean front while the door stays secured. This TLP-BB/PB push button base works on doors with 19 mm-30 mm thickness, matching common 3/4 inch to 1-3/16 inch panel builds used in cabinets and similar casework. The dead bolt design securely locks the door, which helps keep panels from drifting open in everyday use. The knob is non-handed, so it can be used on left- or right-swing doors without changing parts on site. The polished brass finish provides a bright metal look that coordinates with other brass hardware on the project. This part is sold per each, which lets you order exactly the count needed across multiple cabinets or openings without overbuying.
This TLP-BB/PB push button base is designed for door thickness from 19 mm to 30 mm, so it suits many standard 3/4 inch to 1-3/16 inch cabinet doors without altering door construction. When the knob is pushed in, the door will be locked, giving a clear on/off locking position that is easy to understand during installation and later adjustment. The dead bolt arrangement is built to securely lock the door, which is useful when doors are subject to movement from regular opening or closing. This push knob base is non-handed, allowing it to be used on either side of the cabinet run without changing the part. The product works with a required latch body component, specified as TLP-LBM/WHT, so the overall catch system can be planned as a matched set.
The Sugatsune TLP Series push knob base is specified for doors between 19 mm and 30 mm thick, aligning with 3/4 inch to 1-3/16 inch door construction used in many cabinet and furniture applications. That range supports typical panel thicknesses without extra laminating or thinning, which can streamline shop work. The knob locks the door when pushed in, so it suits installations where a flush front is preferred over projecting pulls, such as clean-lined cabinet faces or tight corridors. With a dead bolt to securely lock the door, the catch is well suited for doors that must stay closed under repeated opening cycles. The non-handed design lets the same part serve both left and right doors along a run, simplifying ordering and reducing on-site part sorting. The polished brass finish coordinates visually with other brass fittings, so it can be used as part of an overall brass hardware package on a project.
The defined door thickness range of 19 mm-30 mm helps installers and fabricators match the push knob base to cabinet doors without guesswork around suitability. Since the door will be locked when the knob is pushed in, the action is predictable for users and easy to demonstrate at handover. The dead bolt that securely locks the door contributes to consistent closing performance, which can reduce callbacks tied to doors drifting open. The non-handed construction means orientation does not affect operation, so doors across a bank behave the same whether hinged left or right. The polished brass finish delivers a uniform look, supporting consistency when multiple units are used in the same room or casework group. Because the Web description specifies the separate latch body TLP-LBM/WHT as a required component, project planners can pair this push knob base with that latch body as a coordinated locking system.
The TLP-BB/PB push knob works with door thickness from 19 mm to 30 mm, covering 3/4 inch to 1-3/16 inch doors commonly used in cabinet and casework construction.
The Sugatsune TLP Series push knob locks the door when the knob is pushed in, using a dead bolt to securely lock the door for a firm closed position.
The TLP-BB/PB push knob is non-handed, so it can be used on both left-hinged and right-hinged doors while maintaining the same locking action.
The TLP-BB/PB base has a required component latch body TLP-LBM/WHT, so the latch body works with the base to form the complete locking catch system.
The dead bolt on this push knob securely locks the door, providing a positive lock that helps keep the door closed under normal use.
The Sugatsune TLP-BB/PB push knob has a polished brass finish, giving a bright brass appearance that can coordinate with other brass hardware on the project.
The Sugatsune TLP Series push knob TLP-BB/PB gives you a non-handed push button base designed for 19 mm-30 mm (3/4 inch-1-3/16 inch) doors, with a dead bolt that securely locks the door when the knob is pushed in. The polished brass finish supports projects that call for brass hardware while keeping the door face clean and functional. For cabinet and casework runs where a consistent push-to-lock action and defined door thickness range are important, this push knob base provides those specifics in a single part number.