FormWood White Ash 24"x96" Wood Veneer Sheet, ASHPN38RB2A

FormWood White Ash Veneer Sheet For Surfacing

FormWood White Ash wood veneer sheet gives you a 24 inch by 96 inch face for covering casework, panels, or other flat components with a real wood surface. The 2X8 size matches that 24 inch by 96 inch format, so it works well when you want continuous grain along cabinet sides or tall panels without piecing smaller cuts together. This sheet is part of FormWood wood veneer sheets in the Edgebanding & Surfacing category, so it sits naturally beside edgebanding and laminate in a shop workflow. The 10 MIL F/C description identifies a thin, flexible sheet construction, useful when you need a veneer that conforms to typical flat substrate preparation on woodworking projects. The ASHPN38RB2A manufacturer part number gives installers and shops a precise reference when repeating a job or matching an existing White Ash veneer specification on future orders.

Key White Ash Veneer Details For Projects

• The 24 inch by 96 inch sheet size covers tall cabinet sides or doors in a single run, which reduces seams and pattern breaks on visible faces where continuous grain is preferred.
• The 2X8 10 MIL White Ash F/C description indicates a thin sheet format, which supports typical bonding methods used with flexible veneer over prepared substrates in woodworking.
• The product sits in the Wood Veneer Sheets class under Edgebanding & Surfacing, so it aligns with standard shop processes that pair veneer faces with matching edgeband on cabinets or furniture components.
• The manufacturer part number ASHPN38RB2A provides an exact identifier, which helps shops re-order the same White Ash look and construction when matching work across multiple projects.
• The FormWood brand designation ties this sheet to a known veneer line, which helps drafters and project specifiers call out consistent material across drawings and job documents.

White Ash Veneer Sheet Size And Handling Use

The 24 inch width on this FormWood White Ash veneer sheet suits cabinet sides, tall end panels, and similar vertical components sized within that dimension, so layout often needs fewer joints. The 96 inch length allows full-height coverage on many residential and commercial pieces where a single, uninterrupted White Ash field is important. The 10 MIL F/C notation points to a flexible sheet style, which works with common handling methods used for thin wood veneer during cutting, positioning, and bonding to a stable substrate. As part of the Wood Veneer Sheets category, this sheet fits into workflows where installers apply veneer over panels and then trim, edge, and drill after bonding for finished cabinet or furniture assemblies.

Using This FormWood Veneer In Cabinet Work

Where The White Ash Veneer Sheet Is Applied

This FormWood White Ash 24 inch by 96 inch wood veneer sheet fits jobs that call for real-wood surfacing on flat components such as cabinet ends, door faces within size, or wall panels cut from sheet goods. The 2X8 sizing gives designers a predictable field they can draw around, allowing parts to be nested so that grain direction and visual rhythm stay consistent across a run of cabinets. As a Wood Veneer Sheets product in the Edgebanding & Surfacing group, it is suited to applications where plywood, composite, or other core panels receive a decorative White Ash face as part of the finishing schedule. The White Ash species identity supports projects designed around that specific wood appearance, so the sheet becomes part of the visible finish layer rather than a structural element.

Details That Support Repeatable Installation Results

The 10 MIL F/C description on this 2X8 White Ash veneer sheet points to a thin, flexible construction, which matters when installers need the sheet to lay down cleanly over prepared flat cores without excessive stiffness. The defined 24 inch by 96 inch format provides a known starting size, so cut plans and shop drawings can be set up around that footprint to reduce offcuts and repeated measuring. The ASHPN38RB2A manufacturer part number allows foremen and purchasers to call out the exact same White Ash veneer on future phases or replacement work, which keeps color and grain character consistent across a bank of cabinets or matching millwork. Being part of FormWood veneer sheets means this product sits inside a recognizable line, helping shops maintain the same material family when coordinating doors, ends, and other veneered pieces.

Common Questions About This White Ash Veneer Sheet

Selecting This FormWood Veneer For Your Project

The FormWood White Ash 24 inch by 96 inch wood veneer sheet, specified as 2X8 10 MIL White Ash F/C with part number ASHPN38RB2A, gives shops a defined format for surfacing panels in White Ash. The Wood Veneer Sheets classification under Edgebanding & Surfacing ties directly into workflows where casework and millwork receive a veneer face to match other surfacing materials. For projects built around the White Ash look in a flexible sheet configuration, this FormWood veneer provides a consistent, repeatable option for panel and cabinet work.