Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
FormWood white birch prefinished pre-glued edgebanding gives cabinet and casework edges a matching white birch appearance based on the FormWood brand and white birch description, which helps keep exposed edges visually consistent with white birch surfaces in built projects. The 7/8 inch width from the 7/8 inch designation provides coverage for typical panel thicknesses with extra margin, allowing flush trimming after bonding for a clean edge. The 250 foot length specified in the web description and SAP description supplies a continuous roll suited to production runs or multiple smaller projects, reducing changeovers during edgebanding work. The pre-glued description indicates factory-applied adhesive on the back, so heat activation bonds the tape instead of applying separate glue, simplifying workflow. The prefinished description indicates the face is finished at the factory, so edges arrive with a completed surface that aligns with finished white birch panels in cabinets, furniture, or millwork.
The 7/8 inch width identified in the product and SAP descriptions allows the edgeband to overhang typical panel edges, so users can align, apply heat, and trim back, which helps achieve a straight, flush edge. The pre-glued adhesive layer referenced in the descriptions bonds when heated, so the applicator focuses on heat and pressure rather than spreading separate glue, supporting predictable bond lines on cabinets or furniture parts. The 250 foot roll length supports edging many linear feet of panels in one continuous sequence, which helps keep grain and color appearance consistent across doors, end panels, and shelves on the same white birch project.
The white birch identification in the web and SAP descriptions aligns this FormWood edge band with white birch-faced components such as cabinet cases, doors, drawer fronts, and shelves, so visible edges carry the same wood species look. The 7/8 inch width works well on typical panel edges where a slight overhang is desired, supporting flush trimming on plywood or composite cores used in cabinetry or furniture. The 250 foot roll length suits both shop environments producing multiple cabinets and serious DIY projects that require continuous runs, helping keep color and grain character consistent from one piece to the next. The prefinished description means the face is factory finished, so once the band is bonded and trimmed, the edge presents a completed appearance that aligns with finished white birch surfaces in the assembly.
The pre-glued adhesive layer specified in the descriptions means the glue is applied by FormWood, so the installer relies on consistent factory coverage for even bonding, reducing variables compared to manually spread glue. Heat activation bonds the edgeband during application, so workflow centers on controlled temperature and pressure, which supports uniform adhesion along cabinet sides, tops, and shelves. The prefinished surface identified in the descriptions saves a finishing step on the edge because the band already carries a completed face, allowing the installer to focus on accurate trimming and clean transitions between face and edge. The white birch species description gives the project a coordinated look when used with white birch panels, so end users see a continuous white birch appearance on both faces and edges.
The FormWood PGPFBIW7/8 white birch edgeband is described as 7/8 inch wide and 250 feet long, providing ample coverage for edging multiple cabinet or furniture panels on a project.
The pre-glued description indicates adhesive is already applied to the back of the edgeband, so heat activation bonds it to the panel, simplifying installation steps versus separate glue application.
The prefinished description means the edgeband face is finished at the factory, so once applied and trimmed, the edge presents a completed surface matching finished white birch elements.
The white birch species identified in the descriptions aligns this edgeband with white birch casework, helping edges visually coordinate with white birch cabinet sides, doors, and shelves.
The 7/8 inch width provides slight overhang on typical panels, allowing trimming after bonding for a flush, clean edge on cabinetry, shelving, or furniture components.
The FormWood white birch prefinished pre-glued edgebanding in 7/8 inch width and 250 foot length gives installers a species-matched, ready-to-bond option for white birch projects. The pre-glued, prefinished design supports efficient edging and a consistent finished look on cabinets and furniture. Selecting the PGPFBIW7/8 part number aligns panel edging with FormWood white birch surfaces across your next run.
Sold In: 1 Roll