Solid wood edgebanding cherry from FormWood is a solid wood edgebanding designed to finish exposed edges on woodworking projects where a cherry surface is required. The web description identifies this product as solid wood edgebanding in cherry, so the edge presents real wood rather than a printed pattern when installed along panels or shelves. The product class is edge banding, which means it is intended to cover and protect raw substrate edges in cabinet, furniture, or millwork construction. The SAP description states 15/16 foot fleece non-glued cherry, and the web description specifies 15/16 inch by 500 foot roll, so you work with a continuous cherry strip sized for common panel thicknesses and long runs. The manufacturer part number NGCHE15/16 provides a consistent identifier when matching material across jobs or reordering the same cherry edgebanding for future projects.
The web description lists this FormWood solid wood edgebanding in cherry as 15/16 inch wide, which gives enough overhang on a 3/4 inch substrate to trim both faces cleanly after bonding. That extra width helps account for minor panel variation and keeps the glue line inside the trimmed area. The same description states a 500 foot roll length, so installers can feed long cabinet sides, tall casework, or a full run of shelves without changing rolls during an operation. The SAP description identifies the material as fleece non-glued cherry, indicating a fleece-backed cherry strip without pre-applied glue, which allows it to be used with equipment and adhesives designed for non-glued edgebanding. Together these details define how the material feeds through edge equipment and how it supports a controlled trimming sequence.
The category listing shows this FormWood product in edgebanding and surfacing, under edgebanding, wood, indicating it is intended for wood-based edge applications rather than synthetic laminates. As solid wood edgebanding in cherry, it suits projects that already use cherry components, so cabinet sides, shelves, or furniture carcasses can carry the same species from face to edge. The 15/16 inch width described in the web listing pairs naturally with panels near 3/4 inch thick, giving workable overhang while staying compact enough for typical edgebanding machinery. With a roll length of 500 feet, one roll can support multiple cabinets or a run of casework on the same job, helping maintain visual consistency when many edges are finished from one continuous cherry strip.
The SAP description specifies fleece non-glued cherry, so the cherry strip carries a fleece backing while remaining free of pre-applied adhesive, which allows glue application and pressing steps to be matched to the shop tools used for non-glued edgebanding. That backing type is designed to work as part of an edgebanding system, supporting bond formation between the cherry surface and the substrate during the edge process. The defined 15/16 inch width gives predictable trimming allowance across every length of the 500 foot roll, which supports repeatable setup of trimmers and guides from one panel to the next. The manufacturer part number NGCHE15/16 ties these specifics together under one identifier, so purchasing and production reference the same cherry, width, backing description, and roll format when scheduling work or aligning with existing job documentation.
The product is described as solid wood edgebanding in cherry, so the exposed edge uses real cherry, helping projects maintain species continuity on visible edges.
The web description lists a 15/16 inch width, providing extra material past a 3/4 inch panel for trimming, which supports clean edges and consistent reveal control.
The web description states a 500 foot roll, allowing many panel edges or full cabinet runs to be processed from a single continuous strip for visual consistency.
The SAP description notes fleece non-glued cherry, indicating a fleece-backed cherry edgebanding without pre-applied adhesive, so it is suited to non-glued edgebanding processes.
The brand field identifies FormWood as the manufacturer, which places this cherry edgebanding within FormWood wood surfacing and edge treatment products.
The manufacturer part number NGCHE15/16 uniquely identifies this 15/16 inch, fleece non-glued, cherry solid wood edgebanding for ordering and job reference.
The FormWood solid wood edgebanding, cherry, 15/16 inch by 500 foot roll with fleece non-glued backing offers a defined cherry edge solution for wood-based projects. The 15/16 inch width, 500 foot length, and NGCHE15/16 part number give clear parameters for planning cabinet, furniture, or millwork runs. For projects that rely on cherry faces and demand a matching solid wood edge, this FormWood cherry edgebanding provides a consistent, documented option through Wurth Baer Supply.
Sold In: 1 Roll