FormWood Fir wood veneer sheet gives you a 48 inch by 96 inch sheet sized for standard 4x8 layouts, which streamlines cutting for cabinet cases, doors, and panels that follow common sheet-good dimensions. The sheet is identified as 4X8 20 MIL FIR VERT GRAIN A GRD, so you get a 20 mil wood veneer construction that supports typical woodworking surfacing methods where a flexible but substantial veneer face is needed. The vertical grain fir layout provides a straight, consistent grain direction, which helps projects that rely on uniform grain flow across doors, drawer fronts, or tall panels. The A grade designation describes a higher-grade face, which supports visible fir applications where the appearance of the veneer surface is a primary concern. As a FormWood wood veneer sheet in the Wood Veneer Sheets product class, it is suited for projects where a real wood fir surface is specified instead of laminate.
The FormWood Fir 48 inch by 96 inch wood veneer sheet starts from a full 4x8 footprint, which works with standard plywood or composite cores sized to the same dimensions, helping setups that follow typical cabinet and millwork sizing. The 20 mil wood veneer construction from the SAP description gives the sheet a defined veneer layer, which matters when planning how it will be bonded to cores in surfacing operations and when accounting for the added thickness in fitment. With the vertical grain fir orientation described as FIR VERT GRAIN, the grain runs along the length of the panel, which supports tall door and panel layouts that follow the grain direction for a consistent finished appearance. The A GRD notation in the description identifies an A grade fir face, which fits applications where the surfaced panel is intended as a finished fir face in woodworking projects.
The SAP description 4X8 20 MIL FIR VERT GRAIN A GRD defines this sheet as a vertical grain fir veneer, which suits jobs where straight, uniform grain is part of the design intent on cabinet fronts or panel runs. Because the sheet is 48 inches by 96 inches, it works with layouts that place the vertical grain along the 96 inch dimension, supporting tall doors or wall panels that value continuous grain from top to bottom. The A GRD notation describes an A grade face that supports use on exposed surfaces, which helps when the fir veneer is specified as the final visible layer rather than a substrate-only material. As part of the Edgebanding & Surfacing category and Wood Veneer Sheets product class, this FormWood veneer lines up with workflows that combine edgebanding and veneered panels to achieve a cohesive fir appearance throughout a project.
The 20 mil veneer construction in the description gives a consistent veneer layer for this FormWood wood veneer sheet, which aids repeatable pressing and trimming setups across multiple panels using the same material. The A GRD detail means the face quality is identified in the description, which helps maintain consistency when different batches of FIRQN38RB4C veneer sheets are used on the same job or across matching jobs. The fixed 48 inch by 96 inch size allows consistent cutting diagrams, which supports repeatable yields and predictable waste factors when planning cabinet or panel runs. The specific manufacturer part number FIRQN38RB4C, tied to the FormWood brand and the SAP description, lets shops standardize on this exact fir veneer sheet for projects that call out FormWood fir as part of their written specifications or internal standards.
The FormWood Fir wood veneer sheet is described as 4X8, meaning it is 48 inches by 96 inches, which aligns with standard panel sizes used in cabinet and panel fabrication.
The description lists 20 MIL, indicating the veneer construction uses a 20 mil thickness, which matters when planning bonding methods and transitions to adjacent materials in surfacing work.
The SAP description states FIR VERT GRAIN, meaning the fir grain is vertical along the panel, which supports designs that rely on straight, continuous grain in tall panels or doors.
The A GRD notation identifies an A grade veneer face, which suits visible fir applications where the quality and appearance of the surface are important design considerations.
The manufacturer part number FIRQN38RB4C uniquely identifies this FormWood fir veneer sheet, which supports accurate ordering and repeat use of the same material across projects.
The 48 inch by 96 inch size matches standard sheet dimensions, which simplifies layout and cutting patterns when veneering cabinet components or architectural panels.
The FormWood Fir 48 inch by 96 inch wood veneer sheet, identified as 4X8 20 MIL FIR VERT GRAIN A GRD, gives you a clearly defined size, veneer thickness, grain direction, and face grade for planning fir-surfaced work. With the FIRQN38RB4C manufacturer part number tied to this specific A grade, vertical grain fir sheet in the Wood Veneer Sheets product class, it supports projects that call out a consistent FormWood fir veneer across cabinets, doors, or panels. For jobs that require a real wood fir surface within the Edgebanding & Surfacing category, this sheet offers a documented set of attributes that align to standard 4x8 panel workflows.
Sold In: 1 Each