Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
wood veneer edgebanding pre-glued mahogany describes a FormWood edge banding that uses real wood veneer to finish exposed panel edges, so cabinet and furniture projects get a matching mahogany look instead of a raw substrate line. The edgebanding belongs to the Edgebanding & Surfacing category and the Edge Banding product class, which keeps it aligned with typical woodworking and cabinet shop workflows that already rely on these materials. The mahogany veneer face allows the edge appearance to coordinate with mahogany panels, helping doors, shelves, and casework read as one consistent surface. Because the material is wood veneer, shop tools that already handle veneer, trimming, and sanding work the same way here, so there is no change in basic process. The product identifier PGMAA13/16 and the SAP description 13/16 FLEECE PRE-GLUED MAHOG tie it to a consistent specification, which supports repeat ordering for matching work across multiple jobs.
The edgebanding width of 13/16 inch gives a bit of margin on both sides of a typical 3/4 inch panel, so installers can align the banding quickly, bond it, and trim the slight overhang flush for a clean line. The 0.034 inch thick wood veneer face carries enough material to tolerate light final sanding after trimming, which helps blend the edge into the panel face before finishing. With a 250 foot roll length, the material can be staged next to an edgebander or hand station so multiple components pull from one continuous run, streamlining panel flow. Because this is classified specifically as wood veneer edgebanding, it is suited to projects where the exposed edge is expected to take stain or clear finish along with the panel surface.
The Web Description identifies this material as Wood Veneer Edgebanding, Pre-Glued, Mahogany, 0.034 inch Thick 13/16 x 250 Roll, which positions it for finishing raw board edges on casework, shelving, and furniture parts that share a mahogany appearance. In cabinet shops working with veneered sheet goods, the 13/16 inch width matches well to 3/4 inch nominal panels, so edge treatment for sides, tops, bottoms, and door edges can all follow the same routine. The mahogany veneer face allows shop personnel to carry the same visual species across vertical and horizontal parts, helping installations such as wall cabinets, base cabinets, and built-ins read as one unified system. Because the product is from FormWood, a brand that operates within the Edgebanding & Surfacing category at Wurth Baer Supply, it aligns with other surfacing materials that shops already pull into cutlists and job folders.
The Manufacturer Part number PGMAA13/16 ties directly to the 13/16 inch width, so specifying that code on cutlists or purchase notes keeps all edges on a project using the same dimension, which supports predictable trimming and flush-routing passes. The 0.034 inch thickness interacts well with typical edge trimming tools because there is enough wood to resist chipping at the corner while still staying light enough to follow tight inside corners on smaller components. The 250 foot roll length means one roll can carry through a sequence of cabinet cases, doors, and shelves, letting shops maintain the same grain character and thickness from the first part to the last. The pre-glued construction streamlines bonding steps for installers who use compatible heat application processes, since adhesive application and cleanup are already handled within the banding structure, which keeps benches and machines focused on cutting, applying, and trimming instead of separate glue handling.
The PGMAA13/16 product is a FormWood wood veneer edgebanding, pre-glued, mahogany, 0.034 inch thick, sized 13/16 inch wide in a 250 foot roll for edge finishing work.
The FormWood edgebanding is 13/16 inch wide, giving coverage for typical 3/4 inch panels with extra margin that can be trimmed flush after bonding.
The mahogany wood veneer edgebanding is 0.034 inch thick, providing a workable veneer layer that trims and sands to a clean cabinet-quality edge.
The PGMAA13/16 roll length is 250 feet, supporting multiple cabinets or a full project run from a single roll of edgebanding.
This edgebanding uses wood veneer in a mahogany description, giving exposed edges a mahogany look that aligns with matching panels and components.
This FormWood product is classified under Edgebanding & Surfacing as Edge Banding, so it integrates naturally into cabinet and woodworking edge finishing workflows.
The Wood Veneer Edgebanding, Pre-Glued, Mahogany, 0.034 inch Thick 13/16 x 250 Roll from FormWood gives shops a defined way to carry a mahogany look across exposed panel edges. The PGMAA13/16 part number and SAP description 13/16 FLEECE PRE-GLUED MAHOG hold the critical dimensions and construction in one repeatable spec, simplifying reorders for ongoing cabinet lines or matching add-on work. With its 13/16 inch width, 0.034 inch veneer thickness, and 250 foot roll length, this edge banding supports an efficient flow of cutting, applying, and trimming across professional cabinet and furniture projects.
Sold In: 1 Roll