FormWood mahogany wood veneer sheet describes a 24x96 inch mahogany veneer sized for surfacing larger panels in one run, which helps reduce seams when you face cabinet doors, panels, or custom components. The product sits in the wood veneer sheets class, so it serves as a thin surfacing layer over a separate core rather than structural stock, which keeps weight down while still presenting a mahogany face. Being labeled as a veneer sheet within edgebanding and surfacing means it fits into typical shop workflows for finishing visible faces on plywood, MDF, or similar substrates. The 2x8 dimension stated in the description aligns with common panel sizes, letting you plan layouts around full-height or wide surfaces without excessive trimming. Identified as a mahogany wood veneer sheet, it gives you a consistent species look across multiple pieces where you need a coordinated appearance.
The 24x96 inch sheet size stated in the product name sets the working coverage for each piece, so you can plan cut diagrams and panel layouts around that footprint. The SAP description calling out 2x8 reinforces the same coverage in feet, which helps when you think in full-panel terms during project estimating. As a wood veneer sheet, it is intended to be bonded to a substrate, so it functions as the visible face rather than a load-bearing element. Its role within veneer sheets signals that you would trim it to final dimension after bonding, letting you oversize cuts slightly for clean edges and tight margins on finished parts.
The product category of Veneer Sheets under Edgebanding & Surfacing positions this FormWood mahogany sheet for use on cabinet components, furniture panels, and other surfaced assemblies where you want a uniform mahogany face. The 24x96 inch dimension supports covering tall cabinet sides or long runs of casework from a single sheet, which helps align grain direction across visible faces. Identifying the material specifically as mahogany in the product name gives you a species match when you are pairing veneered panels with solid mahogany parts on frames, edges, or moldings. Because this is supplied as a wood veneer sheet instead of pre-laminated panel, it fits into workflows where you prefer to choose your own core material and thickness while keeping the same surface identity. The wood veneer sheets product class also indicates that similar sheets can be combined on a project for matching faces across doors, drawer fronts, and large panels.
The manufacturer part number MAAQR38RB2A and the SAP description 2X8 10 MIL MAHOG QTD CUT A GRD together highlight a consistent spec, which is important when a project depends on repeating the same mahogany appearance across multiple orders. The mention of 10 MIL in the SAP description points to the veneer sheet construction thickness, affecting how it handles when bonding and trimming, and that matters for controlling edge break and minimizing sand-through risk during finishing steps. The reference to QTD CUT in the description indicates a quartered cut pattern, which influences grain character on the face and helps you aim for a straighter, more controlled grain look on cabinets or panels. The note A GRD identifies the grade callout in the description, tying this sheet to an A grade specification that supports more selective face use where appearance is a priority. Together, these labeled details define a repeatable veneer choice that can be documented on drawings and material lists by exact code.
The veneer sheet is 24x96 inches, giving you a 2x8 foot coverage area per sheet for planning panel layouts and minimizing seams across tall or wide surfaces.
This product is classified as a wood veneer sheet in the Edgebanding & Surfacing category, so it is intended as a thin surfacing layer over a separate core panel.
The product name identifies the sheet as mahogany, providing a mahogany face where you need species coordination with other mahogany components in your project.
The SAP description notes QTD CUT, indicating quartered cut, which shapes the visible grain pattern and supports a straighter, more uniform mahogany appearance.
The 10 MIL reference in the SAP description points to the veneer construction thickness, which influences handling, bonding behavior, and how it responds during trimming operations.
The manufacturer part number MAAQR38RB2A gives you an exact spec reference, so you can document and repeat the same FormWood mahogany veneer sheet across multiple phases.
This FormWood mahogany 24x96 wood veneer sheet provides a defined species, size, and cut pattern, letting you match surfacing decisions directly to drawings and material lists. The 2x8 foot coverage and wood veneer sheets classification position it for use as a visible face over your chosen core material. With the MAAQR38RB2A part number and 2X8 10 MIL MAHOG QTD CUT A GRD description, you gain a consistent reference when you standardize on a specific mahogany look. For projects that call for coordinated mahogany faces across cabinets, furniture, or panel work, this sheet offers a clearly labeled option to integrate into shop workflows.
Sold In: 1 Each