FormWood red oak wood veneer sheet gives you a 48 inch by 96 inch sheet size, which provides broad coverage for casework, doors, or panel surfacing with fewer seams and less layout time on large woodworking projects. The red oak veneer face establishes a consistent red oak appearance, which supports visual alignment with other red oak components in the same installation. The 10 mil backing noted in the 4X8 10 MIL RED OAK QTRS ASSTD FLAKE description indicates a flexible sheet construction, which helps the sheet conform to flat substrates during pressing or layup. The quartered red oak reference in the same description indicates a quarter sawn cut, which produces a straight-grain look that helps create orderly grain flow across cabinet or wall panels. The assorted flake detail in the description identifies flake patterning within that quartered structure, which creates visual interest while staying within a red oak grain family.
The 48 inch by 96 inch dimensions in the product name match standard sheet-good sizes, which simplifies cutting diagrams and helps reduce offcut waste when laying out cabinet sides, ends, or tall panels. The 10 mil detail in the SAP description defines a relatively thin backing, which supports bonding to a range of stable substrates while keeping the overall build thinner than a solid-wood panel. The wood veneer sheet classification in the product class confirms that this material is intended as a surfacing layer, which allows you to use less solid lumber while still presenting a genuine red oak surface on finished components.
The Edgebanding & Surfacing | Veneer Sheets category places this product in a surfacing role, which aligns it with applications like cabinet exteriors, furniture panels, and other visible red oak surfaces in woodworking shops. The wood veneer sheet product class further clarifies that it is designed to be applied over a substrate, which allows fabricators to combine this decorative red oak face with engineered cores for stability in service. The 48 inch by 96 inch size in the product name supports use on full-height case sides and wide panels, which reduces joint lines on large faces. The red oak designation in both the product name and SAP description ties the appearance directly to red oak, which helps maintain a coherent species look where existing trim, doors, or millwork also use red oak. The quartered and assorted flake description indicates a straight-grain orientation with flake figure, which suits designs that call for a linear grain field with added character in the red oak surface.
The 10 mil backing referenced in the SAP description establishes a predictable sheet thickness for the backing layer, which supports consistent pressing setups when multiple panels are produced in the same run. The quartered red oak wording defines the grain structure of the veneer face, which simplifies grain-matching decisions when arranging doors, drawer fronts, and adjacent panels from the same 48 inch by 96 inch sheet. The assorted flake detail within that quartered red oak structure helps identify the expected degree of flake figure, which informs how panels are oriented so that the visual emphasis of the figure lands where it adds the most impact. The FormWood brand noted in the product name signals that this sheet is part of a branded veneer offering, which helps shops repeat successful results by specifying the same manufacturer part number RDOQA28RB4AP on future orders.
The FormWood red oak wood veneer sheet is identified as 48 inches by 96 inches, which fits standard 4x8 layouts for cabinet and panel fabrication.
The 10 mil detail in the SAP description indicates a thin backing layer, which supports flexible veneering applications over appropriate substrates during typical layup workflows.
The SAP description notes quartered red oak, which points to a quarter sawn grain pattern that helps create straight, linear grain fields on finished panels.
The assorted flake wording in the SAP description refers to flake figure within the quartered red oak grain, which adds visual texture to the veneered surface.
The product class lists it as a wood veneer sheet and the category as Edgebanding & Surfacing | Veneer Sheets, placing it in a surfacing role over stable cores.
The manufacturer part number RDOQA28RB4AP identifies this exact 4x8 10 mil red oak quartered assorted flake FormWood veneer sheet for repeat orders.
The FormWood red oak wood veneer sheet in a 48 inch by 96 inch format and 10 mil backing provides a defined, quartered assorted flake red oak face for surfacing cabinet, furniture, or panel projects. The clear identification as a wood veneer sheet within Edgebanding & Surfacing | Veneer Sheets supports straightforward selection when a genuine red oak appearance is needed over stable cores. Using the manufacturer part number RDOQA28RB4AP through Wurth Baer Supply helps align future work to the same red oak look across multiple jobs.
Sold In: 1 Each