FormWood Red Oak wood veneer sheet provides a 48 inch by 96 inch sheet size that covers a full 4x8 surface in one run, which helps installers veneer doors, panels, or casework faces without seams across standard sheet goods. The PSA back wood veneer sheet uses a pressure-sensitive adhesive backing, so the veneer bonds when firm pressure is applied during placement, giving installers a glue-ready surface built into the sheet. The Red Oak veneer sheet belongs to the wood veneer sheets class, which aligns it with typical woodworking, cabinet, and furniture surfacing tasks where a real wood face is required. The quartered assorted flake Red Oak description from the SAP information, shown as RED OAK QTRS ASSTD FLAKE, identifies a Red Oak face with a quartered-cut, assorted flake look, which provides a distinctive Red Oak grain character for visible faces in projects.
The PSA back wood veneer sheet provides a pressure-sensitive adhesive backing on the rear of the veneer, so bonding occurs when pressure is applied during placement, helping streamline veneering steps on suitable substrates. The full 4x8 format reduces the number of seams in large panel work, which supports cleaner layouts on cabinet sides, backs, and furniture panels that follow standard sheet dimensions. As a wood veneer sheet, the product is intended as a surfacing layer, so shops can apply the Red Oak face to compatible cores that match their project build. The Red Oak quartered assorted flake description ties the face to a specific grain appearance, which guides layout decisions when orienting panels for visual consistency in runs of doors, fronts, and larger wall panels.
This FormWood Red Oak wood veneer sheet, with its 48 inch by 96 inch dimension, fits projects that are built around standard 4x8 panels, such as cabinet sides, tall pantry units, or furniture carcass panels that follow sheet-good sizing. As a wood veneer sheet in the Edgebanding & Surfacing | Veneer Sheets category, it serves as a surfacing choice for woodworking and cabinet applications where a Red Oak face is desired on a structural core. The quartered assorted flake Red Oak character, referenced by the SAP description 4X8 PSA 9505 RED OAK QTRS ASSTD FLAKE, suits visible faces on doors, drawer fronts, and wall panels where the varied flake figure becomes a design element. Because this is a PSA back wood veneer sheet, the pressure-sensitive adhesive back is part of the product construction, aligning it with workflows where installers use pressure to bond the veneer over an appropriate substrate during panel assembly.
The consistent 4x8 sizing of this FormWood wood veneer sheet allows shops to plan cut lists around a known 48 inch by 96 inch sheet, supporting repeat layouts for casework runs or multiple identical panels. The manufacturer part number RDOQA28RB4F directly ties to this specific Red Oak quartered assorted flake PSA configuration, so purchasing that part number keeps the Red Oak face and backing style consistent across future orders. The PSA back wood veneer sheet design means the pressure-sensitive adhesive is already on the back of the veneer, which can simplify job sequencing by combining veneer and adhesive into one material choice. The Red Oak QTRS ASSTD FLAKE description connects the veneer face to a quartered-cut assorted flake Red Oak appearance, so designers and builders can specify this exact look when coordinating with other Red Oak surfaces in a project.
The FormWood Red Oak wood veneer sheet is 48 inches by 96 inches, so it spans a full 4x8 area and can cover standard sheet-good panels in one piece for continuous grain.
The PSA back wood veneer sheet has a pressure-sensitive adhesive backing, so the veneer bonds to the substrate when firm pressure is applied during installation, combining veneer and adhesive in one material.
The veneer is identified as Red Oak in the product name and SAP description, providing a Red Oak wood face suitable for projects that call for a Red Oak appearance.
The SAP description lists RED OAK QTRS ASSTD FLAKE, indicating a quartered-style Red Oak veneer with assorted flake figuring that adds distinctive grain character to visible panels.
The 48x96 size matches typical 4x8 cores, allowing large cabinet or panel faces to be surfaced with a single sheet, which reduces layout seams and keeps the Red Oak grain continuous.
Part number RDOQA28RB4F identifies this specific FormWood Red Oak 4x8 PSA quartered assorted flake veneer, so shops can reference it when selecting or reordering the same material.
The FormWood Red Oak wood veneer sheet brings a 48 inch by 96 inch 4x8 format, a Red Oak face, and a PSA back wood veneer sheet construction together in one product, giving woodworking and cabinet shops a defined combination of size, species, and adhesive backing. The quartered assorted flake Red Oak description, tied to part number RDOQA28RB4F, specifies the look and configuration for projects that need this grain character and backer style. When a job calls for a 4x8 Red Oak veneer with pressure-sensitive adhesive backing, this sheet offers that defined setup for consistent planning and ordering through Wurth Baer Supply.
Sold In: 1 Each