FormWood White Oak wood veneer sheet gives you a 48 inch by 96 inch surface to finish cabinet, furniture, or panel projects with a consistent White Oak face. This sheet sits in the Wood Veneer Sheets class within the Edgebanding & Surfacing category, so it is aimed at projects where a real-wood veneer face is part of the build, not an afterthought. The product uses a PSA back, as called out in the 4X8 PSA 9505 WHITE OAK QTRS HEAVY FLAKE description, which means the veneer is prepared with a pressure sensitive adhesive layer for mounting. The White Oak veneer face is quarter sawn with heavy flake, giving the sheet a visibly flaked White Oak grain pattern that can tie into other quartered White Oak work. The FormWood brand identity and specific WHOQH38RB4F part number allow you to call out and repeat the same veneer sheet on drawings and reorders.
The 48 inch by 96 inch dimensions stated in the product name match common sheet-good sizes, allowing the veneer sheet to align with standard 4x8 panel layouts during planning and cutting. A PSA back construction, detailed in the SAP description as 4X8 PSA 9505 WHITE OAK QTRS HEAVY FLAKE, positions this FormWood sheet for adhesive-backed installation steps rather than traditional raw-back layup. The Wood Veneer Sheets product class defines that this piece is meant as a surfacing layer, so it fits naturally into workflows where a substrate is prepared first and the veneer sheet is applied as a finishing face.
The FormWood White Oak 48 inch by 96 inch PSA back wood veneer sheet fits projects that call for a real-wood veneer face over a stable substrate, such as cabinet boxes, furniture panels, or built-in wall elements. Because it is categorized under Veneer Sheets in the Edgebanding & Surfacing group, this product is geared toward visible surfacing work rather than structural framing. The quarter sawn heavy flake detail in the 4X8 PSA 9505 WHITE OAK QTRS HEAVY FLAKE description makes this sheet suited to designs where a flaked quartered White Oak appearance is part of the aesthetic, helping you repeat the same look across multiple doors or panels. The White Oak species naming gives a clear signal when a project schedule calls specifically for White Oak veneer rather than a different species.
The 48 inch by 96 inch format supports repeatable layouts because it follows standard panel dimensions, so cut plans can be mirrored from one sheet to the next without recalculating a nonstandard size. The PSA back construction simplifies the adhesive interface, because the sheet is supplied as a pressure sensitive adhesive-backed veneer as indicated in the SAP description, rather than a loose veneer that would need a separate adhesive layer selected and applied for every panel. The WHOQH38RB4F manufacturer part number and the matching SAP description 4X8 PSA 9505 WHITE OAK QTRS HEAVY FLAKE allow you to name the exact veneer sheet on cut lists, shop drawings, or reorders, keeping the same quarter sawn heavy flake White Oak face consistent every time this product is specified from Wurth Baer Supply.
The FormWood White Oak 48 inch by 96 inch PSA back wood veneer sheet provides a standard 4x8 size, so layouts can follow common panel dimensions for cabinets and furniture.
The PSA back on this veneer sheet, noted in the 4X8 PSA 9505 WHITE OAK QTRS HEAVY FLAKE description, indicates a pressure sensitive adhesive-backed construction for adhesive-based mounting.
The WHOQH38RB4F veneer sheet is White Oak, as stated in the product name and description, so it matches projects calling for a White Oak veneer face.
The grain is described as quarter sawn heavy flake in the SAP description, so the sheet presents a quartered White Oak appearance with a pronounced flake figure.
This FormWood White Oak sheet is in the Wood Veneer Sheets product class under Edgebanding & Surfacing, indicating it is designed as a surfacing veneer layer.
This veneer can be referenced by its FormWood brand name and manufacturer part number WHOQH38RB4F, which uniquely identify the 4x8 PSA White Oak quarter sawn heavy flake sheet.
The FormWood White Oak 48 inch by 96 inch PSA back wood veneer sheet from Wurth Baer Supply combines a standard 4x8 format with a quarter sawn heavy flake White Oak face. The PSA back construction described in the 4X8 PSA 9505 WHITE OAK QTRS HEAVY FLAKE listing positions this sheet for pressure sensitive adhesive-based surfacing work. When a project calls for a defined White Oak veneer from a known brand, the FormWood identity and WHOQH38RB4F part number give you a specific sheet to specify, order, and repeat across cabinet, furniture, or panel runs.
Sold In: 1 Each