FormWood clear pine PSA veneer sheet is a wood veneer sheet from FormWood that uses a PSA back to attach to a substrate, so it serves as a surfacing layer for panels, casework, or other flat components where a pine face is desired. This sheet measures 48 inches by 96 inches, so it covers a standard 4x8 panel in one piece, which helps installers apply a continuous face without layout seams across the field. The product is classified as a wood veneer sheet, so it is intended as a thin wood layer rather than a structural panel, which keeps overall build thickness low on doors, fronts, or wall panels. Being part of a veneer sheet category under edgebanding and surfacing means it is used wherever a wood-looking surface is needed over an underlying core.
This FormWood wood veneer sheet uses a PSA back, so it is intended to bond to an underlying panel during installation, which affects preparation because the substrate becomes the structural element while the veneer provides the finished surface. The 48 inch by 96 inch format matches common panel dimensions, so layout typically centers on aligning the clear pine face with panel edges and trimming to final size after adhesion for a clean perimeter. Because the product is a thin wood veneer sheet rather than a thick board, it works well where overall assembly thickness must remain close to the core dimension while still gaining a pine appearance on the face.
This FormWood clear pine 48x96 PSA veneer is suited to projects built from standard 4x8 substrates, because the sheet size mirrors those dimensions and allows one-piece surfacing. As a wood veneer sheet, it plays the role of the visible layer on cabinets, casework, or panels where the core carries the load and the veneer defines the look. The clear pine face means the sheet supports pine-themed rooms or runs of work where a pine appearance on doors, drawer fronts, and vertical panels needs to stay consistent from part to part. Since it is part of an edgebanding and surfacing category, it integrates naturally into shops that already use laminate, veneer, or similar surfacing materials as a finishing step on fabricated cores.
The PSA back wood veneer sheet design provides a pressure-sensitive adhesive layer across the full 48 by 96 inch sheet, which helps deliver uniform bond contact when the veneer is applied carefully to a panel face. This continuous adhesive surface can reduce variations compared with spot-applied glue patterns, because the bond line extends under the entire veneer face rather than only in stripes or patches. For repetitive shop work, the PSA feature means the bonding step is built into the sheet itself, so installers can focus workflow on alignment, contact, and rolling pressure, which supports consistent results across multiple panels with the same clear pine appearance. Using the manufacturer part number PIWVN38RB4F allows teams to call out this exact FormWood clear pine PSA variant in job documents, which helps keep material selection repeatable on future runs that must match the original work.
FormWood PIWVN38RB4F is a wood veneer sheet classified under wood veneer sheets, so it functions as a thin surfacing layer over a substrate rather than as a structural panel.
A PSA back wood veneer sheet has a pressure-sensitive adhesive backing, so the veneer bonds to a panel face as part of installation, providing both adhesion and a wood surface in one layer.
This FormWood clear pine veneer sheet measures 48 inches by 96 inches, so it is sized to cover a standard 4x8 panel in one piece during surfacing work.
The face on this veneer sheet is clear pine, so the visible surface presents a pine appearance that can coordinate with other pine-focused components in a project.
This wood veneer sheet is applied over a substrate as a surfacing material, so it establishes the finished clear pine face while the underlying core supplies structural strength.
This FormWood clear pine PSA veneer sheet is supplied by Wurth Baer Supply, a distributor serving the woodworking industry with surfacing materials.
This FormWood clear pine 48x96 PSA back wood veneer sheet gives fabricators a pine-faced surfacing material sized to match standard 4x8 panels, which simplifies layout. By using the PIWVN38RB4F part identifier when specifying material, shops can repeatedly source the same clear pine PSA veneer for matching casework, door runs, and panel jobs through Wurth Baer Supply.
Sold In: 1 Each