
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Formwood prefinished red oak edgebanding gives cabinet and furniture projects a solid wood edge treatment in a matched red oak species, so exposed board edges carry the same material look as the field for a unified finished appearance. The edgebanding is 13/16 inch wide, which covers common 3/4 inch panels while leaving working tolerance during trimming, supporting clean flush-routing or sanding. A 250 foot length on a single roll supports longer cabinet runs or multiple smaller jobs without frequent roll changes, helping maintain a steady workflow at the bench or on site. The material is identified by manufacturer part number PGPFRDO13/16, which ties directly to the Formwood line and simplifies reordering when a shop standardizes on this specific red oak banding.
This Formwood prefinished red oak wood edgebanding is described as pre-glued, meaning the adhesive is applied to the back at the factory, so installation centers on heating and bonding rather than gluing from scratch. The 13/16 inch width works well on 3/4 inch substrates because the slight overhang on each side provides material that trims cleanly without leaving thin, starved edges. On a 250 foot roll, long runs of shelving, face frames, or cabinet components can be edged in sequence without stopping to change rolls, which supports efficient shop layouts and repeatable application routines.
Formwood prefinished red oak edgebanding is categorized as edgebanding and surfacing in the wood edgebanding class, so it fits naturally into cabinet, furniture, and millwork projects that already use red oak components. The red oak species matches other red oak elements visually, allowing exposed plywood or composite cores to blend into solid-looking assemblies on doors, drawer fronts, or casework sides. Its 13/16 inch width aligns with common 3/4 inch shop materials used in woodworking, so one standard banding size can support a wide range of panels without switching widths between operations.
The prefinished description means the visible face arrives with a finish already applied, integrating well into production flows where finished red oak panels or parts are being edged after finishing. With finish already on the banding, edge treatment becomes a defined step following cutting and machining, rather than a separate finishing cycle for the edge itself. This supports predictable color and sheen along the edge relative to other finished red oak parts, keeping assemblies visually consistent when viewed from the front or side.
The 13/16 inch W x 250 foot roll size from the Web Description defines both coverage and throughput, giving installers enough width to trim flush and enough length to support several full-sized cabinet runs before switching material. That capacity helps maintain rhythm at edgebanding stations, reducing interruption during batch work on doors, shelves, or gables. The pre-glued construction described in both the Web Description and SAP Description means the adhesive layer is controlled at the factory, which provides uniform glue coverage along the entire length of the banding.
Uniform glue coverage supports consistent bond strength along edges, which in turn helps panels resist edge lift during handling and normal use. Because the product is identified specifically as Formwood Prefinished Red Oak Wood Edgebanding, shops can match this exact material across repeat jobs, keeping color, species, and finish characteristics aligned from project to project. The clear manufacturer part number PGPFRDO13/16 in the Product Name and SAP Description makes it straightforward to specify this same edgebanding in job notes, cut lists, and reorders, helping maintain standardization in professional woodworking environments.
Formwood Prefinished Red Oak Wood Edgebanding PGPFRDO13/16 is an edge banding product used to cover and finish exposed panel edges with prefinished red oak for a coordinated appearance.
Formwood prefinished red oak edgebanding has a width of 13/16 inch, giving coverage past 3/4 inch panels so edges can be trimmed clean and flush during installation.
The Formwood red oak wood edgebanding roll is 250 feet long, supporting extended cabinet or furniture runs and repeated panel edging without frequent roll changes.
Formwood prefinished red oak wood edgebanding is described as pre-glued, so the adhesive is applied at the factory and activated during installation rather than spread separately.
The edgebanding is identified as prefinished red oak, meaning the visible face is finished at the factory to coordinate with finished red oak components.
This 13/16 inch W x 250 foot pre-glued red oak wood edgebanding is produced by Formwood, as indicated in the Product Name and Brand fields.
Formwood prefinished red oak edgebanding 13/16 inch W x 250 foot pre-glued gives cabinet and woodworking shops a defined solution for finishing exposed edges on red oak-based projects. The red oak species, pre-applied adhesive, and prefinished face align well with workflows built around 3/4 inch materials and finished red oak components. Choosing the specific PGPFRDO13/16 Formwood edgebanding part number allows shops to repeat the same look and installation characteristics from job to job, supporting consistent results across cabinets, furniture, and other wood assemblies.
Sold In: 1 Roll