Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
FormWood teak wood veneer sheet is a 48x96 wood veneer sheet designed for surfacing projects where a teak face is required. The sheet is described as 4X8 20 MIL TEAK F/C A GRD, so it provides a 4 foot by 8 foot format that suits full cabinet sides or larger panel work. The 20 mil thickness description identifies a veneer backed to a consistent thickness, which supports even bonding when you are laminating it to a substrate. The A GRD designation references an A grade face, which is used when a higher appearance level on the face side is important on visible cabinetry or furniture. This sheet is categorized under wood veneer sheets, so it serves as a surfacing layer rather than a structural panel. The product is identified by manufacturer part TEAPN38RB4C, allowing straightforward reordering for matching jobs.
This teak 48x96 wood veneer sheet uses a 4X8 layout, so it aligns with common panel and casework dimensions when planning cuts. The 20 mil description highlights a comparatively thin veneer construction, which supports typical veneer pressing methods over stable cores in shop workflows. The A GRD face notation focuses attention on the presentation side of the sheet, guiding installers to orient that face outward during layout and bonding. Being part of a wood veneer sheets category, this product fits into processes where a separate substrate carries the structural load while the veneer provides the finished surface.
This FormWood teak veneer sheet is described as 4X8 20 MIL TEAK F/C A GRD, so it fits work where a full-size 4 foot by 8 foot teak face is needed across panel surfaces. Within the veneer sheets category, it serves as a finish layer on cabinets, wall panels, or furniture components that rely on another core for strength. The A GRD face description positions this sheet for visible locations, where the face side forms the main presentation surface in the room. The manufacturer part TEAPN38RB4C links this specific sheet to FormWood, which supports consistent material selection across different areas of the same project.
The 20 mil thickness description indicates a backed veneer construction, which supports consistent behavior under press pressure when bonding to substrates. Because the sheet size is 48x96, cuts can be laid out so grain and face presentation remain continuous across adjoining components, reducing layout adjustments on site. The TEAK F/C wording confirms the teak face configuration, which guides installers to position that face toward the finished side during cutting and bonding. The A GRD notation means the face is specified at an A grade level, which supports uniform appearance standards across doors, drawer fronts, or panel runs when the same product is used repeatedly.
The FormWood teak wood veneer sheet is described as 4X8 and 48x96, so it is sized for projects built around standard 4 foot by 8 foot panel layouts.
The 20 mil description refers to the veneer sheet thickness, which supports consistent adhesive spread and pressing behavior when bonding to a suitable substrate.
The A GRD designation indicates an A grade face, which is intended for use where the face of the veneer sheet provides a visible finished surface.
This product is classified under wood veneer sheets, so it is used as a surfacing layer over another core that provides structural support.
The TEAK F/C description identifies teak as the face species, which defines the exposed surface appearance when the sheet is used on cabinets or panels.
The manufacturer part TEAPN38RB4C uniquely identifies this FormWood teak veneer sheet, which supports repeat ordering for matching surfaces across multiple jobs.
This FormWood teak 48x96 wood veneer sheet, identified as 4X8 20 MIL TEAK F/C A GRD and part TEAPN38RB4C, provides a defined teak A grade face for projects built around standard 4 foot by 8 foot layouts. The 20 mil veneer construction and classification as a wood veneer sheet align it with surfacing tasks over separate substrates. For work that depends on a consistent teak appearance across cabinets, panels, or furniture components, this sheet offers a clearly specified format that can be planned into cutting diagrams and project material lists.
Sold In: 1 Each