Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
FormWood teak veneer sheet provides a wood veneer surfacing option for projects that call for a teak face with a PSA back. This 48x96 sheet covers larger cabinet, fixture, or panel faces in a single run, which helps reduce seams across the finished surface. The product is classified as a wood veneer sheet, so it gives a genuine wood look for applications where laminate is not desired. The PSA back is designed to simplify bonding steps compared to using separate adhesive, which can streamline workflow on repetitive jobs. The sheet format lets installers trim and fit on site using standard woodworking tools, supporting adjustments around openings or edges. The identified FormWood brand positions this sheet within a veneer-focused product line, which matters when standardizing materials across multiple jobs or matching to existing FormWood surfacing.
This 4x8 PSA teak veneer sheet is intended to be applied as a surfacing layer over a suitable substrate, so it functions as the finished face rather than a structural panel. The pressure-sensitive adhesive back is designed for direct bonding, which removes a separate adhesive spread step and can shorten setup time when covering multiple panels. The sheet format lets installers rough cut, position, and then final trim after bonding, which helps manage reveals and edges on casework. As a wood veneer sheet, it is suited to typical woodworking environments where cabinets, fixtures, and similar assemblies are fabricated or refurbished.
The 48x96 dimension matches many standard cabinet and panel layouts, so one FormWood teak veneer sheet can cover full-height sides, doors, or backs without splicing. This reduces alignment steps where multiple pieces would otherwise meet across a visible field. The wood veneer sheet classification indicates this product is intended as a surfacing layer over cores such as plywood or composite panels, which lets shops keep using their preferred substrates while changing only the visible teak face. The teak designation supports projects that specify that species look, such as coordinated runs of casework or fixtures. In woodworking shops that handle both new construction and refacing, keeping a consistent 4x8 format helps with cutting patterns and panel optimization.
The PSA back described in the product information provides a pressure-sensitive adhesive surface, which is engineered for direct application to the substrate and helps produce a uniform bond line without separate glue spread. This can improve repeatability across multiple panels in a production run, since the adhesive layer is factory-applied rather than field-applied. The defined 4x8 size makes layout predictable on the bench, which simplifies jigs and cutting routines for recurring cabinet or fixture designs. Because the product is a FormWood wood veneer sheet with a teak face, shops can record the TEAPN38RB4F manufacturer part number for reorders, keeping color and grain family consistent across initial installs and later expansions. Within veneer-focused workflows, using the same brand and classification helps standardize finishing schedules and expectations on similar teak-faced jobs.
The FormWood teak veneer sheet measures 48 inches by 96 inches, so it matches common 4x8 panel layouts and can cover many cabinet or panel faces in a single piece.
The PSA back on this teak veneer sheet refers to a pressure-sensitive adhesive layer, allowing the veneer to be bonded by pressing it to the substrate during installation.
TEAPN38RB4F is a wood veneer sheet with a teak face and PSA back, used as a thin surfacing layer over cabinet, fixture, or panel substrates.
The 4x8 size lets installers cover many cabinet sides, doors, or panels without seams, which simplifies layout and keeps the teak grain field more continuous.
This teak PSA back veneer sheet is produced by FormWood, so it aligns with other FormWood veneer and surfacing products used in woodworking shops.
This veneer sheet acts as the finished teak surface over a structural core, so the substrate carries strength while the veneer provides the visible wood face.
This FormWood teak veneer sheet pairs a teak face with a PSA back in a 48x96 format, giving shops a defined surfacing option for cabinet, fixture, and panel work. The wood veneer sheet classification means it serves strictly as a finish layer over a chosen substrate. With a clear TEAPN38RB4F identifier and a standard 4x8 size, this product fits structured cut lists and repeatable panel programs. When a project calls for a teak appearance from a recognized veneer brand, this sheet provides a consistent option for ongoing jobs.
Sold In: 1 Each