FormWood Walnut Wood Veneer Edgebanding 7/8", Unfinished, 500', NGWAL7/8

Formwood Wood Veneer Edgebanding For Walnut Panels

Formwood wood veneer edgebanding gives you a walnut edge treatment that matches walnut panel faces across cabinet, furniture, and fixture work. This edge banding is identified as a wood veneer edgebanding, walnut, 0.022 inch thick, 7/8 inch wide, supplied on a 500 foot roll, so it supports longer production runs where consistent appearance and sizing matter from part to part. The edgebanding is described as 7/8 foot fleece non-glued walnut, which tells you it uses a walnut veneer with a fleece backing and arrives without adhesive applied, letting you select an edgebanding adhesive system that pairs with your existing edgebander or workflow. The Formwood brand and NGWAL7/8 manufacturer part number clearly define the product for repeat ordering, project documentation, and matching across jobs that specify this exact walnut edge banding.

Walnut Edgebanding Details That Support Workflow

• The 0.022 inch thickness controls the veneer layer at the edge, which helps with consistent trimming results and creates a defined transition between the edge and the walnut face on doors, drawer fronts, or casework.
• The 7/8 inch width gives coverage across typical panel thicknesses while leaving working margin for trimming, so edges can be flushed and profiled without exposing the panel core when processed correctly.
• The 500 foot roll length supports a higher number of parts per roll, which reduces changeovers during production and keeps walnut edge appearance uniform throughout a run using this same material.
• The walnut wood veneer face provides a real-wood walnut surface at the edge, which lets stain and clear finishes respond like walnut across the entire part for visual continuity.
• The fleece non-glued construction pairs the veneer with a fleece backing and no pre-applied adhesive, which allows use with separate adhesive systems that match shop equipment and process preferences.

Non-Glued Walnut Edgebanding Installation Approach

This Formwood wood veneer edgebanding, walnut, 0.022 inch thick and 7/8 inch wide, is described as fleece non-glued walnut, so it is designed for use with an external adhesive source rather than a pre-applied glue layer. That configuration fits into installations where an edgebander or other edging process applies its own adhesive to bond the walnut veneer edge to panels. The 500 foot roll format supports continuous feeding through compatible equipment, and the controlled 0.022 inch thickness works with standard trimming and scraping steps used after bonding. Because the veneer width is 7/8 inch, there is working overhang beyond common panel thicknesses, which supports trimming to final size after the adhesive has set.

Where This Walnut Edge Banding Works Best

Using Formwood Wood Veneer Edgebanding On Projects

Formwood wood veneer edgebanding, walnut, 0.022 inch thick, 7/8 inch wide, is suited to edging applications where a walnut face is already specified for the main panel, because it carries a walnut wood veneer along the edge. The 7/8 inch width works across many panel thicknesses typically used in cabinetry or furniture, leaving a small amount of overhang to trim away after bonding so the walnut edge aligns cleanly with the panel faces. The 500 foot roll length supports batch work on case parts, shelving, or fronts that all call for the same walnut edging, which helps maintain visual consistency across a room or project.

Details That Help Repeatable Walnut Edge Results

The 0.022 inch thickness of this walnut wood veneer edgebanding sets a predictable veneer layer for trimming and scraping, which supports repeatable edges when running multiple parts through the same cutting and finishing sequence. The fleece non-glued walnut construction means the fleece backing is present under the walnut veneer while adhesive is supplied from a separate source, so the same edgebanding can be matched with different adhesive types as long as they are suited to fleece-backed veneer edgebanding processes. The explicit NGWAL7/8 manufacturer part number and the web description calling out wood veneer edgebanding, walnut, 0.022 inch thick, 7/8 inch by 500 foot roll, let shops document exactly which material was used, helping future maintenance, repairs, or expansions align to the same walnut edge specification.

Common Questions About NGWAL7/8 Walnut Edgebanding

Select This Walnut Edgebanding For Matching Edges

Formwood wood veneer edgebanding, walnut, 0.022 inch thick, 7/8 inch wide, in a 500 foot roll, gives you a defined option when a walnut edge is needed to coordinate with walnut-faced panels. The fleece non-glued walnut construction pairs this veneer with a fleece backing and no pre-applied adhesive, so the edgebanding can work with adhesive application methods that are already part of your edging process. Using the NGWAL7/8 identifier when specifying or reordering ties current and future work to the same walnut edge material, supporting visual and material consistency across projects.