Formwood Wood Veneer Edgebanding, Pre-Glued, Walnut, 0.034" Thick 13/16" x 250' Roll, PGWAL13/16, PGWAL13/16

Formwood Wood Veneer Edgebanding For Walnut Projects

Formwood wood veneer edgebanding gives you a walnut edge treatment that matches walnut-faced panels, so cabinet runs and furniture parts finish with a consistent wood appearance. This pre-glued, walnut wood veneer edge banding uses a 0.034 inch thick veneer, which provides enough material for clean trimming and light sanding without cutting through the face. The 13/16 inch width covers standard 3/4 inch panels with a small margin, helping hide minor alignment variation along cabinet sides, shelves, and tops. Supplied on a 250 foot roll, this edgebanding supports longer runs of casework or multiple smaller jobs from a single SKU, which simplifies ordering and material staging. The FormWood brand identity on this wood veneer edgebanding signals a purpose-made product for woodworking applications, aligning well with cabinet shops, commercial millwork, and serious home projects that need a real-walnut edge detail.

Key Edgebanding Details That Support Your Work

• The walnut wood veneer material creates a real-wood edge, which helps visually blend exposed edges with walnut-faced panels across cabinetry and shelving.
• The pre-glued construction builds in the adhesive layer, so the installer works with a single strip rather than managing separate glue application during edging work.
• The 0.034 inch thick veneer gives a workable surface for trimming and light sanding, which supports cleaner edges after flush cutting and edge clean-up.
• The 13/16 inch width covers typical 3/4 inch substrates, allowing slight overhang that can be trimmed flush for a uniform edge line along panel runs.
• The 250 foot roll length supplies extended footage from one roll, which supports continuous edging on multiple cabinet parts or larger casework jobs without frequent roll changes.

Edgebanding Dimensions That Influence Installation

This wood veneer edge banding in walnut is specified at 13/16 inch wide, which gives coverage beyond 3/4 inch panels so the installer can trim back to a precise line along both faces. The 0.034 inch thick veneer provides a workable thickness during trimming and light sanding, reducing risk of accidental breakthrough into the substrate during edge clean-up. Supplied as a 250 foot roll, the edgebanding supports continuous feeding through standard edging workflows on cabinet components or shelving parts. The pre-glued construction means the adhesive layer is already present on the strip, so installation processes can center on activating that layer and pressing the banding in place along panel edges.

Using Walnut Wood Veneer Edgebanding In The Shop

Where This Formwood Edgebanding Fits Best

This Formwood wood veneer edgebanding in walnut is used wherever a walnut edge is needed on exposed panel sides, such as cabinet boxes, shelves, or furniture components built from sheet goods. The 13/16 inch width aligns with edging needs for 3/4 inch substrates, giving enough overhang to trim for a clean reveal on both faces. Because the veneer thickness is 0.034 inch, the material performs well in typical edging operations that involve flush-trimming cutters and follow-up sanding, supporting smooth transitions between the edge band and panel face. The 250 foot roll length matches shop environments that run multiple components or repeat parts, supplying consistent walnut edging from one continuous roll for better color and grain continuity along a project.

Details That Support Repeatable Edgebanding Results

The pre-glued design of this walnut wood veneer edge banding consolidates adhesive and veneer into a single product, which supports consistent glue coverage across long edges because the glue layer is factory-applied. The 0.034 inch thickness gives enough material above the substrate plane so trimming tools can reference reliably, helping reduce chatter marks and supporting straighter, more uniform edges. With its 13/16 inch size, this edgebanding offers a repeatable amount of overhang on 3/4 inch panels, which simplifies set-up for edge trimmers and sanding blocks across multiple parts. The 250 foot roll format helps maintain the same walnut appearance and veneer structure from piece to piece, which matters when building banks of cabinets or rows of shelves that need a consistent finished edge line.

Common Questions About This Walnut Edgebanding

Select This Walnut Roll For Edge Work

This Formwood wood veneer edgebanding in walnut, at 13/16 inch wide and 0.034 inch thick on a 250 foot roll, provides a ready-to-use edge solution for 3/4 inch panel work. The pre-glued construction streamlines edging by combining veneer and adhesive in one product, aligning well with cabinetry, shelving, and other walnut projects that call for a consistent, real-wood edge treatment.