FormWood walnut PSA veneer sheet gives you a 48 inch by 96 inch wood veneer surface sized for full 4x8 panels, so you can face cabinet sides, doors, or casework without seaming smaller pieces. The PSA back wood veneer sheet uses a pressure sensitive adhesive backing, which lets you bond the sheet to a suitable substrate with controlled pressure instead of traditional contact cement, supporting a cleaner workflow. This wood veneer sheet is part of the FormWood line in the wood veneer sheets category, so it fits naturally into projects that call for real wood surfacing rather than laminates. The product is identified by manufacturer part WALPN28RB4E, which ties directly to the specific walnut look and PSA construction for repeat ordering. The SAP description 4X8 PSA468 WALNUT COMM GRD identifies the sheet as walnut commercial grade, aligning it with everyday cabinet, fixture, and woodworking applications where a practical walnut face is needed.
This FormWood walnut 48x96 PSA back wood veneer sheet is sized to match common 4x8 substrates, so it lays out directly over standard sheet goods during fabrication. The PSA backing referenced in the product name acts as the bonding layer, which means the installer works by positioning the sheet and applying pressure across the walnut face to achieve adhesion instead of applying a separate adhesive coat. Being a wood veneer sheet in the Edgebanding & Surfacing|Veneer Sheets category, it integrates into workflows where panels, doors, and case components receive a real-wood walnut face as part of the surfacing step.
The SAP description 4X8 PSA468 WALNUT COMM GRD points to a walnut commercial grade veneer surface, which suits cabinet exteriors, furniture panels, or interior fixtures where a genuine walnut look is part of the design. With dimensions of 48 inches by 96 inches noted in the product name, the sheet covers full-size panels for case sides, tops, and ends, helping keep grain and color flow continuous on larger faces. As a wood veneer sheet in the Edgebanding & Surfacing|Veneer Sheets category, it plays a role wherever woodworkers or installers need to upgrade raw substrate faces to walnut, such as custom millwork, built-ins, or shop-fabricated components. The FormWood branding ties this product to a recognized veneer sheet line, so shops can keep the same walnut appearance consistent across multiple jobs that call for PSA walnut veneer for panels.
The PSA back wood veneer sheet construction named in the product title provides a pressure sensitive adhesive layer across the back, which supports even bonding when pressure is applied from the face side, helping maintain a flat walnut surface. The 4x8 sheet size indicated by 48x96 in the name reduces joint lines on broad cabinet or wall faces, which can simplify edge trimming and finishing steps after bonding. The commercial grade reference in the SAP description groups this walnut sheet into an everyday work grade, aligning it with repeated shop use where multiple panels must share a similar walnut character. The manufacturer part number WALPN28RB4E gives installers and buyers a precise identifier to match on reorders, supporting long-term projects or phased work where the same walnut PSA veneer sheet must be used again.
The FormWood walnut PSA veneer sheet is 48 inches by 96 inches, so it matches standard 4x8 substrates and lets you cover full panels in one piece.
The PSA back wood veneer sheet description indicates a pressure sensitive adhesive backing, so the sheet bonds to the substrate when pressed into place during installation.
The WALPN28RB4E veneer sheet is described as walnut in the SAP description, providing a walnut wood veneer face for matching walnut-focused projects.
The sheet is listed in the wood veneer sheets product class and Edgebanding & Surfacing|Veneer Sheets category, aligning it with general surfacing tasks on panels and casework.
The commercial grade note in the SAP description identifies the veneer as suitable for everyday cabinet, fixture, and similar woodworking applications using walnut surfaces.
This FormWood walnut 48x96 PSA veneer sheet is identified by manufacturer part WALPN28RB4E, which distinguishes this exact walnut PSA configuration.
The FormWood walnut 48x96 PSA back wood veneer sheet WALPN28RB4E combines a walnut commercial grade face with a PSA backing in a full 4x8 format, aligning directly with standard panel work. For cabinet shops and woodworkers choosing material for walnut-faced panels, this wood veneer sheet offers a clear identity, a defined commercial grade, and an adhesive-backed construction tailored to surfacing tasks on sheet goods.
Sold In: 1 Each