FormWood walnut wood veneer sheet gives you a walnut face in a manageable sheet format, so you can apply a real-wood surface to panels, casework, or fixtures with consistent color and grain from the same sheet. The 4x10 NBL walnut layout described in the SAP text provides a broad surface area, which supports larger runs like tall cabinet ends or wall panels with fewer seams to align. Being in the wood veneer sheets category positions this product for surfacing work rather than solid lumber construction, which helps control material usage and yield on sheet-based jobs. The walnut species stated in the SAP description provides the familiar dark, rich tone associated with walnut projects, which matters when tying new work into existing walnut elements on the same job.
The 4X10 NBL walnut wording in the SAP description defines this sheet as a 4-foot by 10-foot surfacing piece, which directly matches standard panel-processing equipment used in woodworking shops. That size relationship simplifies breaking down the veneer to match common core sizes for cabinets or fixtures. The classification under Edgebanding & Surfacing, specifically veneer sheets, positions the product for use over substrate panels rather than structural framing, which keeps it aligned with cabinet and millwork workflows. The walnut identification repeated across the web description and SAP description anchors the color and grain expectation, which supports planning layouts so that doors, end panels, and drawer fronts read as a coordinated walnut group.
The SAP description 4X10 NBL WALNUT QTD CUT A GRD identifies a 4-foot by 10-foot quartered-cut walnut A grade veneer sheet, which positions it well for tall case sides, closet panels, or reception fronts that benefit from extended vertical runs. The quartered-cut notation in that same description signals a quartered grain pattern, which supports straighter grain visuals on doors and panel sets compared with more varied grain cuts. Because the product is listed as a wood veneer sheet in the Edgebanding & Surfacing category, it is suited to being bonded over engineered cores for cabinet boxes or architectural panels, which aligns with typical shop-based sheet processing. The walnut species callout provides the warm, dark character expected from walnut, which helps designers and installers line up this sheet with walnut shelving, tops, or trims on the same project. The manufacturer part number WALQN310RS4J ties directly to this specific walnut configuration, which lets a shop repeat an established look by referencing the same part on future jobs.
The mention of QTD CUT and A GRD in the SAP description indicates a quartered-cut A grade walnut face, which favors a more uniform grain structure that helps doors and adjacent panels read as a controlled, orderly field. That consistency is useful when sequencing multiple cabinet ends or panel bays, because similar grain flow reduces visual distractions at joints and corners. The 4X10 NBL WALNUT wording recorded in the SAP description aligns the sheet to a 4-foot width and 10-foot length, which allows longer components to be laid out in a single piece, reducing the need for seams across vertical spans. Being part of the veneer sheets product class positions this item for face-layer applications on cores, which helps control weight and material cost while still presenting a full walnut surface. The FormWood branding in the product name connects this sheet to a recognized veneer line, which simplifies matching this walnut face with other FormWood veneer selections specified under the same manufacturer part number WALQN310RS4J.
This FormWood veneer sheet is walnut as identified in the product name and SAP description, which provides the dark, warm look associated with walnut projects and related millwork.
The 4X10 wording in the SAP description indicates a 4-foot by 10-foot walnut veneer sheet, which supports larger panel layouts with fewer seams across tall or wide cabinet and wall sections.
The QTD CUT reference in the SAP description points to quartered-cut walnut, which tends to produce straighter, more uniform grain that helps adjacent doors and panels align visually.
The A GRD wording in the SAP description signals an A grade face, which suits this sheet to more visible surfaces where a higher appearance standard is preferred.
This product is classified as a wood veneer sheet within Edgebanding & Surfacing, aligning it with panel surfacing tasks over cores rather than structural framing projects.
The manufacturer part number WALQN310RS4J identifies this specific FormWood walnut veneer configuration, helping shops reorder the same walnut look on repeat jobs.
This FormWood walnut wood veneer sheet, identified in the SAP description as 4X10 NBL WALNUT QTD CUT A GRD, gives shops a defined 4-foot by 10-foot quartered-cut A grade walnut face for panel surfacing. That combination of walnut species, sheet format, and face grade supports projects where continuous walnut runs, controlled grain, and coordinated components are important. Selecting this WALQN310RS4J sheet through Wurth Baer Supply aligns cabinet, millwork, or fixture panels around a consistent walnut specification that can be referenced and repeated across multiple jobs.
Sold In: 1 Each