FormWood Walnut 48"x96" Wood Veneer Sheet, WALQN28RS4C

FormWood Walnut Veneer Sheet For Cabinet Surfacing

FormWood walnut wood veneer sheet gives you a 48 inch by 96 inch walnut surface for cabinets, casework, or panels, so you can apply a real-wood face across larger components without piecing together smaller offcuts on the job. The sheet is built as a wood veneer sheet product in the veneer sheets category, so it fits directly into typical edgebanding and surfacing workflows where a broad, flat face is required. This FormWood sheet is identified as WALQN28RS4C, which lets shops match this exact face material again when repeating a job or expanding an installation later. The walnut veneer is commercial grade, which provides a work-ready appearance for common woodworking projects where a consistent walnut look is needed across multiple parts. As part of Wurth Baer Supply's wood veneer sheet offering, it slots into standard material lists for professional woodworking and serious DIY shop work.

Key FormWood Veneer Details For Shop Use

• The 48 inch by 96 inch size covers a typical 4x8 panel, allowing full cabinet sides, doors, or wall panels to be faced in one run, which reduces seams and keeps layout straightforward on the bench.
• The 20 mil construction described in the SAP text as 4X8 20 MIL WALNUT QTD CUT COMM GRD provides a measurable thickness reference, helping plan handling, trimming, and edge treatment steps in the surfacing process.
• The walnut species called out in the SAP description delivers a walnut appearance on the finished face, which supports matching to other walnut components in the same room or project.
• The "QTD CUT" in the SAP description identifies this as quartered cut walnut, giving a predictable grain direction that supports repeatable layout across door sets and panel runs.
• The commercial grade noted in the SAP description sets the general grade expectation, which helps shops align this veneer with appropriate job types and cost levels in their material planning.

Applying The 48x96 Veneer Sheet In Workflow

The 48 inch by 96 inch FormWood walnut wood veneer sheet size fits the footprint of standard 4x8 substrates, so panels can be surfaced without resizing the core first, simplifying layout and glue-up steps. The 20 mil reference in the SAP description gives a sense of the veneer sheet's build, which supports planning for trimming, corner details, and transitions to edgebanding during fabrication. Because this is a wood veneer sheet in the veneer sheets category, it integrates naturally into existing surfacing processes used with other sheet goods, letting shops use familiar pressing, cutting, and finishing routines. The walnut commercial grade face described in the SAP text provides a consistent walnut look suitable for a range of cabinet, furniture, and interior woodworking applications where a uniform species appearance is important.

Using This Walnut Veneer Sheet In Real Projects

Where The FormWood Walnut Sheet Is Typically Applied

The FormWood walnut wood veneer sheet with its 48 inch by 96 inch size works well on cabinet sides, doors, or casework panels that follow standard 4x8 dimensions, reducing layout time when breaking down sheet stock for a run of parts. As a wood veneer sheet within Wurth Baer Supply's veneer sheets offering, it fits into edgebanding and surfacing work where a walnut face is desired over plywood or other core materials. The commercial grade walnut face described in the SAP text suits common interior woodworking uses such as built-ins, office fixtures, or residential cabinetry where a clean, project-ready walnut appearance is expected across visible surfaces. Because the sheet is quartered cut walnut as noted by "WALNUT QTD CUT COMM GRD" in the SAP description, the grain direction runs in a predictable, linear pattern, which supports door banks and panel groupings that need a coordinated grain look along a wall run or across a bank of tall units.

Why The WALQN28RS4C Details Support Repeatable Results

The manufacturer part number WALQN28RS4C uniquely identifies this FormWood walnut wood veneer sheet, so shops can reference the same part for reorders when matching an existing installation or expanding a cabinet line. The SAP description "4X8 20 MIL WALNUT QTD CUT COMM GRD" spells out the essential traits - size, approximate build, quartered cut pattern, walnut species, and commercial grade - giving project planners a concise summary to plug directly into cut lists and job folders. Using a 48 inch by 96 inch commercial grade walnut sheet helps keep material specifications consistent across doors, drawer fronts, and carcass sides, supporting uniform color and grain presentation from station to station. As a wood veneer sheet in the edgebanding and surfacing category, it provides a defined role in the assembly sequence, so fabricators can schedule veneering, trimming, and edging as a single, repeatable stage across multiple panels. Working with a quartered cut walnut face also aids in visual planning, since the grain alignment from sheet to sheet can be anticipated when laying out parts on the bench for high-visibility projects.

Common Questions About This Walnut Veneer Sheet

Selecting This Sheet For Walnut Surfacing Work

The FormWood walnut wood veneer sheet WALQN28RS4C combines a 48 inch by 96 inch format, walnut species, quartered cut grain, and commercial grade into a single, clearly identified sheet option. For shops building cabinets, casework, or interior fixtures that call for a walnut face, this wood veneer sheet from Wurth Baer Supply aligns with standard 4x8 workflows and common surfacing routines. When a project specification points to FormWood walnut veneer with the WALQN28RS4C part reference, this sheet provides the defined size, appearance, and commercial grade described in the SAP text, supporting straightforward material selection for repeat or new jobs.