Century Components Cascade waste pullout uses Baltic Birch plywood with strong dovetail construction to create a rigid pullout frame that stays square under load, which helps doors track smoothly and keeps the waste bins aligned in daily use. The natural prefinished surface on the Baltic Birch gives the pullout a clean interior look, so the waste area matches higher-end cabinet interiors without extra finishing steps on site. A unit top routed to match the profile of 34 and 50 qt. bins positions the bin rims accurately, which helps prevent rocking and keeps the bin lips level with the top frame. This CASBM200-34PF-GR model is a bottom mount trash pullout that ties directly into the cabinet floor, giving a solid base that supports the weight of the grey bins and contents over repeated open-close cycles.
This Cascade 20-3/8 inch bottom mount waste pullout fastens to the cabinet floor using its floor mount brackets, which creates a solid connection that carries the weight of the two 34 quart grey bins and their contents. Because the Blum 170lb MOVENTO slides are under mount, the moving hardware sits below the pullout, which keeps the sides clear and allows the Baltic Birch box to present a clean interior profile. Left/right and up/down adjustability built into the MOVENTO under mount slides adds another layer of positioning control, which helps align the pullout front relative to the cabinet opening. Four adjustable door mounted brackets tie the cabinet door to the pullout, and their horizontal adjustment and door tilt control help achieve an even reveal when working across inset and full overlay applications.
This Century Components Cascade 20-3/8 inch Birch bottom mount waste pullout is designed for kitchen and bath cabinet applications where a concealed trash solution is needed within the cabinet run. As part of the bottom mount trash pullouts class, the unit anchors to the cabinet floor, which makes it suitable for frameless or face frame cabinets that can accept floor-mount brackets. Two 34 quart grey bins sit in the routed top opening, giving a defined waste capacity that suits everyday household or light commercial kitchen use. The routed top that matches both 34 and 50 qt. bin profiles keeps the bin rims located in a consistent plane, which helps when the front door needs to cover the bin tops cleanly. Works for inset and full overlay applications, so the same assembly can be used in different cabinet styles across a project where some doors are inset into the frame and others overlay the face.
Baltic Birch plywood with strong dovetail construction forms a stable pullout box, so the slides and bins have a rigid structure to attach to, which reduces twist that can affect soft-close action. The natural prefinished Baltic Birch interior means the pullout can be installed as received, which provides a consistent factory appearance without additional shop finishing steps. Blum 170lb rated MOVENTO soft-close under mount slides contribute a high load capacity relative to typical residential trash loads, which supports smooth motion even when the 34 quart grey bins are heavily filled. Left/right and up/down adjustability on the MOVENTO slides allows incremental changes to pullout position after mounting, which helps solve minor alignment issues without drilling new holes. Four adjustable door mounted brackets with horizontal adjustment and door tilt control link the cabinet door to the pullout structure, giving multiple points of adjustment that help align the door plane and gap lines with adjacent fronts. Bins are available with matching lids, sold separately, which offers an option to cover the 34 quart grey bins when a closed top appearance or additional containment is desired in the finished installation.
The CASBM200-34PF-GR is a Century Components Cascade Birch bottom mount waste pullout with two 34 quart grey bins, providing a cabinet-integrated trash solution using Baltic Birch and Blum MOVENTO soft-close under mount slides.
The pullout uses Blum 170lb rated MOVENTO soft-close under mount slides, placing the slide hardware beneath the Baltic Birch box to support the load while keeping the slide mechanism concealed inside the cabinet.
The Blum MOVENTO under mount slides provide left/right and up/down adjustability, allowing the installer to shift the pullout box position to refine alignment with the cabinet opening and surrounding fronts.
The CASBM200-34PF-GR is a bottom mount trash pullout that uses floor mount brackets to anchor the pullout to the cabinet floor, creating a stable base under the Baltic Birch box and bins.
The Century Components Cascade waste pullout works for inset and full overlay applications, letting the same pullout be used in cabinet runs that mix inset doors and full overlay fronts.
The four adjustable door mounted brackets provide horizontal adjustment and door tilt control, helping align the attached door with neighboring cabinet fronts and fine-tune the reveal around the waste pullout opening.
The Century Components Cascade 20-3/8 inch Birch bottom mount waste pullout with two 34 quart grey bins brings together Baltic Birch construction, a routed bin-top interface, and Blum 170lb rated MOVENTO soft-close under mount slides to support dependable cabinet trash management. Floor mount brackets and under mount slides create a solid, concealed support system, while left/right and up/down adjustability plus four adjustable door mounted brackets help align the pullout front and door in both inset and full overlay applications. For cabinet projects needing a defined waste capacity and an interior-friendly natural prefinished Birch pullout, this CASBM200-34PF-GR unit offers a coordinated way to integrate trash storage into kitchen or bath cabinetry.
Sold In: 1 Set